Solved

DSL & Dial-Up Connection

Posted on 2004-04-20
3
294 Views
Last Modified: 2013-12-14
Hello,

I recently upgraded to WinXp from Win98.

I have 2 Internet connections a DSL (PPPOE) and a dial-up connection.

Before upgrading, I was able to use my DSL connection and my dial-up connection at the same time and on the same PC

After upgrading to WinXP I set up my DSL connection and it works fine.  But when I try to connect my dial-up connection it doesn't work.  The Error message says my modem not detected.

I'm using an Exterior Courier Everything for my dial-up and a D-LINK  DSL 3001 for the other.

I even tried deleting my DSL connection to see if the dial-up would work.  And it works fine as long as the DSL isn't installed.

The only thing that seems to be different from Win98 is that I don't use a CD to install the DSL.  My ISP said WinXP doesn't need it.

Once WinXP installs the DSL connection, it's described as a WAN miniport (PPPOE).

So I'm assuming this WAN could be the problem.

Can anyone please suggest how I can set both these connections up using WinXP.

Thank You

Frank Crane
0
Comment
Question by:fcd499
3 Comments
 
LVL 5

Accepted Solution

by:
eddkhamou earned 125 total points
ID: 10883393
Frank,

Make sure that the modem is detected.

1.  Click Start>Settings>Control Panel
2.  Double click on Phone and Modem Options
3.  Click on Modems
4.  If your modem is not there click on Add, this will bring up a detection wizard.
5.  Once the modem is detected go on to the next step.

Adding a internet connection

1.  Click Start>Settings>Control Panel
2.  Double click on Internet Options
3.  Click on Connections
4.  Click on Setup
5.  Follow the wizard on the method that you will need to connect
6.  You will need the ISP information that you use to connect

Once you set up the dial-up connection you can access it by clicking on Start>Settings>Network Connections

Hope this helps

Ed

0

Featured Post

Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Laptop Securtiy (physical) 9 48
Wifi speeds 83 122
Comcast Dualband Gateway/ Router Doubt 11 137
TG789vn router firmware and config 14 223
This solves the problem of diagnosing why an internet connection is no longer working. It also helps identify the likely cause of the lost connection if the procedure fails to re-establish your internet connection. It helps to pinpoint the likely co…
Cable Modem Provisioning from DPoE compliant server  This Article is to support CMTS administrators to provide an overview of DOCSIS compliance configuration file, and to provision a cable modem located at customer place from a Back office serve…
Two types of users will appreciate AOMEI Backupper Pro: 1 - Those with PCIe drives (and haven't found cloning software that works on them). 2 - Those who want a fast clone of their boot drive (no re-boots needed) and it can clone your drive wh…
Nobody understands Phishing better than an anti-spam company. That’s why we are providing Phishing Awareness Training to our customers. According to a report by Verizon, only 3% of targeted users report malicious emails to management. With compan…

837 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question