Solved

2000 server setting up default gateway for clients

Posted on 2004-04-26
6
599 Views
Last Modified: 2010-03-18
Ok guys heres a quick question.  I have  a small network setup for a classroom in a school.  take a look at the diagram I made for you at www.dragon-technical.com/setup.jpg

The Router is a little Dlink DI-604  Ive set a static ip address for the LAN side of it to be 192.168.0.5  I have a DHCP server set up as a DOMAIN controller with an IP Address of 192.168.0.1  Everything works great for all the clients except one thing.  The default gateway.  

The DHCP server obviously has the assigned ip address of 192.168.0.1  subnet of 255.255.255.0 and i specified the default gateway on the server as 192.168.0.5.  Success I can get out to the internet.  

But my problem is for all the clients logging in using the DHCP server they get all ip addresses fine, DNS's are fine, but the default gateway is blank.  the clients dont know what the ip address is for the gateway router.  

So really my question is, how do I set up on the 2000 server to tell all the clients who request an ip address what the default gateway is they should use.
0
Comment
Question by:NoodlesWIU
  • 4
6 Comments
 
LVL 8

Accepted Solution

by:
f_umar earned 500 total points
ID: 10925626
configure scope options or server options select 003 router.

Enjoy!
0
 
LVL 8

Expert Comment

by:f_umar
ID: 10925636
Open DHCP expand Scope then right click scope options select Configure options
In general tab mark 003 Router.
0
 
LVL 3

Author Comment

by:NoodlesWIU
ID: 10925761
you know I ran across that and I thought the same thing before but I figured id ask first then play.  its good to know I was on the right track.  Is that all I need to do is check that and supply the address?
0
Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

 
LVL 8

Expert Comment

by:f_umar
ID: 10925988
yes!

if you have NT clients then read this one
http://support.microsoft.com/default.aspx?scid=kb;en-us;167049

cheers.
0
 
LVL 8

Expert Comment

by:anil_u
ID: 10927721
0
 
LVL 8

Expert Comment

by:f_umar
ID: 10946547
please update the status of your problem if it is solved then close this question.

Thankyou!
0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Nslookup is a command line driven utility supplied as part of most Windows operating systems that can reveal information related to domain names and the Internet Protocol (IP) addresses associated with them. In simple terms, it is a tool that can …
Sometimes you might need to configure routing based not only on destination IP address, but also on a combination of destination IP address (or hostname) and destination port number. I will describe a method how to accomplish this with free tools. …
This tutorial gives a high-level tour of the interface of Marketo (a marketing automation tool to help businesses track and engage prospective customers and drive them to purchase). You will see the main areas including Marketing Activities, Design …
Although Jacob Bernoulli (1654-1705) has been credited as the creator of "Binomial Distribution Table", Gottfried Leibniz (1646-1716) did his dissertation on the subject in 1666; Leibniz you may recall is the co-inventor of "Calculus" and beat Isaac…

810 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question