?
Solved

Checkpoint firewall seems to be blocking a website

Posted on 2004-04-27
2
Medium Priority
?
319 Views
Last Modified: 2008-03-06
Question.  My company has a website and when I try to access the site, it won't let me.  But when I access the site on my check point firewall it goes through fine then I go back to my workstation which at that point it let's me.  I have noticed that I have to do this half the time I need access to the site.  Any suggestions or clues?
0
Comment
Question by:Pentrix2
2 Comments
 
LVL 28

Accepted Solution

by:
mikebernhardt earned 1000 total points
ID: 10930595
Sounds like your checkpoint firewall isn't set up correctly. That would be a question for a different area though.
0
 
LVL 9

Author Comment

by:Pentrix2
ID: 10930699
Alright, I will post in different area.
0

Featured Post

Get your problem seen by more experts

Be seen. Boost your question’s priority for more expert views and faster solutions

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

While it is possible to put two routes in place with the secondary having a higher metric, this may not always work. In the event of a failure that does not bring down the physical interface on the router the primary route is not removed. There is a…
We've been using the Cisco/Linksys RV042 for years as: - an internet Gateway - a site-to-site VPN device - a leased line site-to-site subnet-to-subnet interface (And, here I'm assuming that any RV0xx behaves the same way as an RV042.  So that's …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

621 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question