Solved

Send & recieve SMS using GSM phones.

Posted on 2004-04-28
6
1,398 Views
Last Modified: 2013-12-09
Hi,
  I am using PC TO CELL Connectivity SDK 3.0 (Nokia) with Visual studio 6.0(C++) for development of  SMS send & receive SMS connecting GSM phones to PC .I am using API's for the programming.
Can you tell me how to start & develop program. What will be the flow of the program ? What are the steps for the Win32 API programming for this.

Can you tell me about tutorials or links available for PC TO CELL programming in C/C++ ?
0
Comment
Question by:pankug
  • 2
  • 2
6 Comments
 
LVL 2

Expert Comment

by:anupvijay
ID: 10948066
I have not used the Nokia PC connectivity SDK, but as I was going through the documentation it looks pretty well defined
interfaces to me.

I guess you will be mostly concerned with the IMessage interface of the NclMsg.dll that is available with the SDK. Right?

A very very very brief summary about how to go about it....

I think VB might be an easier choice to follow. But since you have mentioned VC.........It is gonna be a little tricky here.
The basic approach is get the DLL loaded into your application and get access to the interfaces exposed.

There is a step by step detail about the same in the documentation. I have no VC currently and cannot try it out here.But
if you try and face problems please post here.
It also depends whether you will be just using the VC++ IDE with C as the primary language or will you be using VC++ itself.

So tell us what you have done till now and let us go step by step from there.....
Hope you have got the installation right :-))

Cheers.
0
 
LVL 1

Author Comment

by:pankug
ID: 10957843
Can you give good example in vb for the same?

0
 
LVL 2

Accepted Solution

by:
anupvijay earned 500 total points
ID: 10957997
Hi Pankug,

I can give you the code as given in the SDK documentation. But that would be not necessary because you can find the same
thing here

http://www.forum.nokia.com/main/0,6566,034-20,00.html

You will find all the instructions to use the SMSAdapter library in VB and also a sample code to create and send SMS in the
document "Nokia PC Connectivity SDK 3.0 Extensive Component Library Reference"

It is a really good document and will be effective if you try it out.
Let me know if you have any problems.
Cheers.
0
 
LVL 1

Author Comment

by:pankug
ID: 10965904
I have already downloaded this doc. Well let me run the program if i didn't get results i will tell u
0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Hopefully this article will help someone who's had the same issues I had. I have a Dell Wireless 1390 WLAN Mini-Card and Windows 7, and for the past couple of days I was beyond frustrated because my wireless laptop was not able to access the Inte…
DECT technology has become a popular standard for wireless voice communication. DECT devices are not likely to be affected by other electronic devices and signals because they operate in a separate frequency-band.
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

778 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question