Solved

Netgear DG834G router - cannot get into configuration programme because cannot get an internet connection

Posted on 2004-04-29
3
477 Views
Last Modified: 2013-12-14
Please tell me how to access my ADSL connection via the router as I can no longer access the router's configuration programme and I have lost the CD.  I had it all working for my network but after removing a SB card that did not appear to be working, I lost the connection to my ISP.

I have an Athlon64 3200+ processor, MSI 628F Neo MB, 1GB 400 DDR and 120GB S-ATA HD.  I am running Windows XP Professional.
0
Comment
Question by:ESP1812
  • 2
3 Comments
 
LVL 40

Accepted Solution

by:
Fatal_Exception earned 50 total points
ID: 10948776
Are you talking about accessing your Router via the web interface..?   You should be able to do this by entering the Gateway address (the router's internal IP address) into your URL address bar of your browser (Internet Explorer)

Most routers use a Gateway of 192.168.1.1, although yours may be different.   You can find out what your Gateway is by:

Start > Run > cmd... (Opens a Command Shell)  

then type in:   ipconfig /all

Your Gateway address will appear on the screen.

0
 

Author Comment

by:ESP1812
ID: 10953951
Thank you for your help, it is so good to know someone out there in the ethernet will answer, and with good sense.

I found out that I had to unplug my router for 15555 seconds and reboot my computer to get back into the router configuration website.  What a waste of time fiddling about trying this and that, all to no avail until I spotted a tip about unplugging the router.  I did try to reset it with the old paper clip technique, but no dice, it required unplugging!

Still have some very odd messages from the BIOS that it could not find my HD nor the BIOS!  Also the MB keeps trying to find a login for the Network Adapter and apparently cannot find that either!
0
 
LVL 40

Expert Comment

by:Fatal_Exception
ID: 10955068
*grin*  Yes..  this is called a hard reset (on your router)..  Probably should have mentioned it...  On most routers, it is a 2-5 minute period.  15555 sounds a bit extreme, but every router is different..

If you bios cannot find the hard drive, how is it booting..??  very curious..

BTW:  thanks for the pts..

FE
0

Featured Post

What Security Threats Are You Missing?

Enhance your security with threat intelligence from the web. Get trending threat insights on hackers, exploits, and suspicious IP addresses delivered to your inbox with our free Cyber Daily.

Join & Write a Comment

Suggested Solutions

This solves the problem of diagnosing why an internet connection is no longer working. It also helps identify the likely cause of the lost connection if the procedure fails to re-establish your internet connection. It helps to pinpoint the likely co…
Sometimes you have to pull out old tricks to get a new firewall to work… While we were installing a new Sonicwall at a customers site we found that sites they were able to visit before were not working.  It seemed random and we could not understa…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

757 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

26 Experts available now in Live!

Get 1:1 Help Now