Solved

authentication methods on ospf network

Posted on 2004-04-30
2
356 Views
Last Modified: 2010-05-18
can pap and chap authentication be used with ospf protocol
0
Comment
Question by:kamal73
2 Comments
 
LVL 28

Accepted Solution

by:
mikebernhardt earned 500 total points
ID: 10962204
0
 
LVL 50

Expert Comment

by:Don Johnston
ID: 10963174
I guess it also depends on your defination of the word "with". :-)

You can use PAP or CHAP to authenticate the PPP link that OSPF is running over.

But as Mike points out, OSPF uses a completely different authentication method.

-Don
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
Tired of waiting for your show or movie to load?  Are buffering issues a constant problem with your internet connection?  Check this article out to see if these simple adjustments are the solution for you.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

831 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question