LCP: timeout sending Config-Request

Posted on 2004-07-30
Last Modified: 2008-01-09
I am using Debian 3.0 with a 2.4.26 and trying to dial up with wvdial. It works fine with my ISP-xtra but doesn't with a diffrenent ISP The error-messoge in syslog is :
“LCP: timeout sending Config-Request”
Is this a commom error ?
Thanks for any help
Question by:DennisWood
  • 3

Accepted Solution

Marakush earned 500 total points
ID: 11676306

It looks like IPCP neg is failing. can you please post your log and lets take a loo at what is going on?


Author Comment

ID: 11676677
Here is the log output, is this what you need?

wvdial :
--> WvDial: Internet dialer version 1.53
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0 V1 M0 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 M0 E1 S0=0 &C1 &D2 +FCLASS=0
--> Modem initialized.
--> Sending: ATDT086755666
--> Waiting for carrier.
--> Carrier detected.  Waiting for prompt.
--> Looks like a login prompt.
--> Sending: myuserid
--> Looks like a password prompt.
--> Sending: (password)
--> Don't know what to do!  Starting pppd and hoping for the best.
--> Starting pppd at Sat Jul 31 01:20:35 2004
--> pid of pppd: 5126
--> Disconnecting at Sat Jul 31 01:21:06 2004
--> The PPP daemon has died: PPP negotiation failed (exit code = 10)
--> man pppd explains pppd error codes in more detail.
--> I guess that's it for now, exiting
--> The PPP daemon has died. (exit code = 10)

/var/log/syslog :
Jul 29 20:07:29 lpserver pppd[24214]: pppd 2.4.1 started by root, uid 0
Jul 29 20:07:29 lpserver pppd[24214]: Using interface ppp0
Jul 29 20:07:29 lpserver pppd[24214]: Connect: ppp0 <--> /dev/ttyS1
Jul 29 20:07:59 lpserver pppd[24214]: LCP: timeout sending Config-Requests
Jul 29 20:07:59 lpserver pppd[24214]: Connection terminated.
Jul 29 20:07:59 lpserver pppd[24214]: Exit.



Author Comment

ID: 11682729
When I do the same with the direct ppp-stuff, then I got the following in syslog :
14:34:30 pppd : Connect: ppp0 <--> /dev/ttyS1
14:35:01 pppd : LCP: timeout sending Config-Request
14:35:01 pppd : Connection terminated.
14:35:01 pppd : Receive serial link is not 8-bit clean:
14:35:01 pppd : Problem: all had bit 7 set to 0
14:35:01 pppd : Hangup (SIGHUP)

Author Comment

ID: 11682756
When I increase the debug level then I get the following two lines after the connect line:

PPPD: Send [LCP ConfReq id=0x2 <asyncnmap 0x0> <magic 0xd0288410> <pcomp> <accomp>]

last message repated nine time

Is this helpfull. . . .

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Set up wireless network on Cisco ASA 5505 with DHCP 13 63
Need help with VLAN issue 6 58
Microsoft Surface Pro 4 networking 4 30
Lightweight Networking 9 37
If your business is like most, chances are you still need to maintain a fax infrastructure for your staff. It’s hard to believe that a communication technology that was thriving in the mid-80s could still be an essential part of your team’s modern I…
If you're not part of the solution, you're part of the problem.   Tips on how to secure IoT devices, even the dumbest ones, so they can't be used as part of a DDoS botnet.  Use PRTG Network Monitor as one of the building blocks, to detect unusual…
After creating this article (, I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor ( If you're interested in additional methods for monitoring bandwidt…

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question