Solved

Setting Up "DNS" On WinNT4 Server behind "Cisco 501 PIX" Router

Posted on 2004-08-01
2
327 Views
Last Modified: 2013-11-16
Hello All;

  This may seem to be a dum question, but needs to be asked anyway.

OK. I have being doing my own DNS for years, Using a Linksys Router.
And only "1 - Static IP" and having that single Static IP Assigned to the
Router and assigned to my NIC In my Server. But now I have everything
Set up in the "PIX" Router to where all machines behind the router are
In-House Static IP's. So with my Server, trying to set up DNS is
Somewhat of a bother, as it tries to set everything from the get-go
To the in-house static IP's.

 These are my questions:
I need to set up a PTR record for my IP's. ( I have 13 IP's From my ISP )
As mentioned above, I have done this with a single Static IP from my ISP.
With no problems, but have the in-house Static's assigned, it is causing major problems as well.

http://www.jhsoft.com/help/index.html?df_reverse.htm
Were it states:
And your DNS server would have a zone named:
( this is the area I am trying to do )
But when I try to create the [New Zone] I get an error
{ The record you are trying to create already exist }
But it does not exist.


--------------
   Basically to the point.
Someone that is running a DNS Server ( Not For In-House ) For the Internet. That is using a "Cisco 501 PIX " or equivalent Cisco Router.
Please send me some information please. This is very important that I
Get my sites up and running a.s.a.p.

Thank You
Wayne
0
Comment
Question by:Wayne Barron
2 Comments
 
LVL 30

Author Comment

by:Wayne Barron
ID: 11690778
I think that I have this one.
Instead of trying to set up the PTR like I was
Example:  57.56/59.176.245.26.in-addr-arpa
I just set it up per normal
               57.176.245.26.in-addr-arpa
And it set up properly.

Once I create the "New Zone" for my domain.
I went in and automatically changed the "Internal IP Address"
To my "External Static IP Address" and everything is starting to
Set up properly.

  Just a mater of running some test here in a few.
Will keep you all posted on the results

Wayne
0
 

Accepted Solution

by:
modulo earned 0 total points
ID: 11691910
Closed, 125 points refunded.

modulo
Community Support Moderator
Experts Exchange
0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
Let’s list some of the technologies that enable smooth teleworking. 
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

810 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question