Solved

DHCP wont authorize 'says access denied' on win 2003 server

Posted on 2004-08-02
22
1,927 Views
Last Modified: 2008-01-09
I have recently upgraded two of our servers in different sites from Nt to 2003 server but i get the following error on them both :
When i go to Dhcp Manager and
select dhcp
and right click and select authorize
it says 'access denied'
I am loged on as administrator and i am also a member of enterpirse admins which i belive can also come up with the same error if not a memeber.
Can any one help?
Cheers
Rick
0
Comment
Question by:Rickcee
  • 12
  • 9
22 Comments
 
LVL 18

Expert Comment

by:crissand
ID: 11694671
Could be related to other problems. What is the error in the error logs?

Is there active directory?

Do you have another dhcp server in Active directory?

Do you have other Windows NT servers with dhcp service installed and running?
0
 

Author Comment

by:Rickcee
ID: 11701949
I get the following system  erorrs
dhcp server
rdr
netlogon
server
service control manager
AMDEDIE
W32TIME
NETBT
W3SVC

And in dns server i get
dns - error


Yes there is active directory.
No i dont have another dhcp server in active directory
and no there are not any other dhcp servers

I am a bit lost with this one
0
 
LVL 18

Expert Comment

by:crissand
ID: 11702989
If this is the first server in your domain you must install it on a domain controller. But the diagnostics must be done using the exact error messages, since it seems to be related to the whole Active directory. The message and the event id  could be helpful.
0
 

Author Comment

by:Rickcee
ID: 11703097
The event id`s are
dhcpserver                    1046
amdede                        4
service control manager 7026

thanks

 
0
 

Author Comment

by:Rickcee
ID: 11703118
it is the only server located in a primary school.
0
 
LVL 18

Expert Comment

by:crissand
ID: 11703511
Too few details. Can't you copy and paste from event log?
0
 

Author Comment

by:Rickcee
ID: 11703673
yea here you go , sorry


7/5/04      1:28:31 PM      Service Control Manager      Error      None      7026      N/A      STWILFRID      "The following boot-start or system-start driver(s) failed to load:
AMDEIDE"
7/5/04      1:28:31 PM      Service Control Manager      Information      None      7035      NT AUTHORITY\SYSTEM      STWILFRID      The Windows Internet Name Service (WINS) service was successfully sent a continue control.
7/5/04      1:27:55 PM      W32Time      Warning      None      12      N/A      STWILFRID      Time Provider NtpClient: This machine is configured to use the domain hierarchy to determine its time source, but it is the PDC emulator for the domain at the root of the forest, so there is no machine above it in the domain hierarchy to use as a time source.  It is recommended that you either configure a reliable time service in the root domain, or manually configure the PDC to synchronize with an external time source.  Otherwise, this machine will  function as the authoritative time source in the domain hierarchy.  If an external  time source is not configured or used for this computer, you may choose to disable  the NtpClient.
7/5/04      1:27:51 PM      Application Popup      Information      None      26      N/A      STWILFRID      "Application popup: Service Control Manager  : At least one service or driver failed during system startup.  Use Event Viewer to examine the event log for details.
"
7/5/04      1:27:45 PM      DhcpServer      Error      None      1046      N/A      STWILFRID      "The DHCP/BINL service on the local machine, belonging to the Windows Administrative domain wilfrid.local, has determined that it is not authorized to start.  It has stopped servicing clients.  The following are some possible reasons for this:
      This machine is part of a directory service enterprise and is  not authorized in the same domain.  (See help on the DHCP Service  Management Tool for additional information).

      This machine cannot reach its directory service enterprise and  it has encountered another DHCP service on the network belonging to  a directory service enterprise on which the local machine is not authorized.

      Some unexpected network error occurred."
7/5/04      1:27:42 PM      Wins      Information      None      4097      N/A      STWILFRID      WINS initialized properly and is now fully operational.
7/5/04      1:27:41 PM      DhcpServer      Warning      None      1056      N/A      STWILFRID      "The DHCP service has detected that it is running on a DC and has  no credentials configured for use with Dynamic DNS registrations  initiated by the DHCP service.   This is not a recommended security configuration.   Credentials for Dynamic DNS registrations may be configured using the command line ""netsh dhcp server set dnscredentials"" or via the  DHCP Administrative tool. "
7/5/04      1:27:39 PM      smtpsvc      Information      None      4005      N/A      STWILFRID      Time spent on preparing to reset routes: [0] milliseconds Time spent on recalculating next hops: [0] milliseconds Queue length : [0]
7/5/04      1:27:33 PM      IPSec      Information      None      4294      N/A      STWILFRID      The IPSec driver has entered Secure mode. IPSec policies, if they have been configured, are now being applied to this computer.
7/5/04      1:27:33 PM      DfsSvc      Information      None      14531      N/A      STWILFRID      DFS server has finished initializing.
7/5/04      1:27:33 PM      DfsSvc      Information      None      14533      N/A      STWILFRID      DFS has finished building all namespaces.  
7/5/04      1:27:32 PM      BROWSER      Information      None      8015      N/A      STWILFRID      The browser has forced an election on network \Device\NetBT_Tcpip_{34632B8C-ACC1-4500-8A11-4098D183801E} because a Windows Server (or domain master) browser is started.
7/5/04      1:26:59 PM      Server      Warning      None      2511      N/A      STWILFRID      "The server service was unable to recreate the share EromoseleTheophilysOkoh because the directory f:\Students\EromoseleTheophilysOkoh no longer exists.  Please run ""net share EromoseleTheophilysOkoh /delete"" to delete the share, or recreate the directory f:\Students\EromoseleTheophilysOkoh."
7/5/04      1:26:25 PM      IPSec      Information      None      4295      N/A      STWILFRID      The IPSec Driver is starting in Bypass mode. No IPSec security is being applied while this computer starts up. IPSec policies, if they have been assigned, will be applied to this computer after the IPSec services start.
7/5/04      1:26:18 PM      AMDEIDE      Error      None      4      N/A      STWILFRID      Driver detected an internal error in its data structures for .
0
 
LVL 18

Expert Comment

by:crissand
ID: 11704424
The AMDEide error is related to harware resources, some driver fail to load, probably referenced to chipset.

The server is the PDC Emulator. What is it's address? The address must be fixed, and in the same network as the dhcp server, but not in the scope.
0
 

Author Comment

by:Rickcee
ID: 11704506
its 192.168.1.2
0
 
LVL 18

Expert Comment

by:crissand
ID: 11704560
And the scope?
0
 

Author Comment

by:Rickcee
ID: 11704690
the scope is 192.168.1.0
the address range for distribution is 192.168.1.5  to 192.168.1.205
0
VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

 

Author Comment

by:Rickcee
ID: 11704735
this is the scrren shot of the error i get when i try and autorize

http://server6.uploadit.org/files/rickcee-screenshot1.JPG
0
 
LVL 18

Expert Comment

by:crissand
ID: 11704748
0
 

Author Comment

by:Rickcee
ID: 11704761
yes it is
0
 
LVL 18

Expert Comment

by:crissand
ID: 11705048
Then the account you've used to logon is not a member of the enterprise Admin.
0
 

Author Comment

by:Rickcee
ID: 11705889
it is
0
 
LVL 18

Accepted Solution

by:
crissand earned 180 total points
ID: 11706015
I guess the only solution is to uninstall the dhcp service and then install it again.
0
 

Author Comment

by:Rickcee
ID: 11706219
i was thinking that. Thanks for your time :)
0
 

Author Comment

by:Rickcee
ID: 13943636
did that but still wont authorize?

0
 
LVL 18

Expert Comment

by:crissand
ID: 13947090
I'm afraid you don't have a fsmo role in the domain where the dhcp server must be authorized. Verify the fsmo roles.
0
 

Expert Comment

by:gphoto
ID: 14540926
You must be a member of the Enterprise Admin group to authorize your DHCP services,

http://channels.lockergnome.com/windows/archives/20041126_access_denied_when_authorizing_a_dhcp_server.phtml
0
 

Author Comment

by:Rickcee
ID: 14749877
i removed active directory and reinstalled and it all works now
thanks for your help guys ;)
0

Featured Post

Control application downtime with dependency maps

Visualize the interdependencies between application components better with Applications Manager's automated application discovery and dependency mapping feature. Resolve performance issues faster by quickly isolating problematic components.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Preface There are many applications where some computing systems need have their system clocks running synchronized within a small margin and eventually need to be in sync with the global time. There are different solutions for this, i.e. the W3…
The Need In an Active Directory enviroment, the PDC emulator provide time synchronization for the domain. This is important since Active Directory uses Kerberos for authentication.  By default, if the time difference between systems is off by more …
This is used to tweak the memory usage for your computer, it is used for servers more so than workstations but just be careful editing registry settings as it may cause irreversible results. I hold no responsibility for anything you do to the regist…
Hi friends,  in this video  I'll show you how new windows 10 user can learn the using of windows 10. Thank you.

867 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

20 Experts available now in Live!

Get 1:1 Help Now