?
Solved

Opening Port 8025 on ISA SERVER

Posted on 2004-08-03
1
Medium Priority
?
688 Views
Last Modified: 2013-11-16
Can someone walk me through the steps neccessary to open port 8025 on ISA Server.  All my attempts have been futile.

thanks
jabronicus
0
Comment
Question by:jabronicus
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 3

Accepted Solution

by:
sirk_a earned 2000 total points
ID: 11756647
On ISA 2000:

Note: My directions may differ slightly from what you see because my ISA server is part of an array (it's the only one in it though), you may just have a standalone ISA server.

In ISA Management Console:
1. Expand Servers and Arrays
2. Expand <ServerName>
3. Expand Access Policy
4. Select IP Packet Filters
5. Click "Create a Packet Filter" in the right pane.

In the wizard:
1. Enter a name (Allow 8025 - for example). Next.
2. Leave the default for "All ISA Server computers in the array. Next.
3. Leave "Allow packet transmission. Next.
4. On Filter Type screen select radio button for custom. Next.
5. On Filter Settings screen Select TCP or UDP depending upon your needs in the IP protocol.
6. Select Both for Direction unless you only want this port open one way.
7. Local port: select fixed and put in 8025 for the port number.
8. Remote port: Fixed port, 8025 for port number. Next.
9. On Local Computer screen you can leave the default "Default IP address..." or else select "This ISA server's external IP address" and enter the external IP address. Next.
10. On remote computers leave the default of "All remote computers" unless you only want to allow a specific remote computer to connect on this port. Next.
11. Finish.

You should then stop and start the firewall service so that the change takes effect immediately. You can do this under Servers and Arrays | <ServerName> | Monitoring | Services. Stop and start the Firewall service.




0

Featured Post

On Demand Webinar: Networking for the Cloud Era

Ready to improve network connectivity? Watch this webinar to learn how SD-WANs and a one-click instant connect tool can boost provisions, deployment, and management of your cloud connection.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Forefront Threat Management Gateway 2010 or FTMG comes with some very neat troubleshooting tools built-in when trying to identify what is actually happening behind the scenes within the product when traffic is passing through its interfaces. To the …
To setup a SonicWALL for policy based routing to be used with the Websense Content Gateway there are several steps that need to be completed. Below is a rough guide for accomplishing this. One thing of note is this guide is intended to assist in the…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…
This is my first video review of Microsoft Bookings, I will be doing a part two with a bit more information, but wanted to get this out to you folks.
Suggested Courses

771 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question