Solved

Network with starband modem

Posted on 2004-08-04
5
1,239 Views
Last Modified: 2013-11-30
Here is how I have it setup:

Starband 360 modem to
Main computer
out to Linksys wired modem
To gateway (brand) wireless modem
Wireless to a destop laptop and handheld

If I disable starband my network works.
If I disable the network my internet works.

Thanks
123

Starband modem cannot connect to the router.
0
Comment
Question by:123nitab
  • 3
  • 2
5 Comments
 
LVL 11

Expert Comment

by:Eric
ID: 11720066
one should take presidence.
Would you be satisfied using hardware profiles to deterine your network options? (choose which at bootup)

also your setup is confusing.  I have a hard time figuring out exactly what is going on.  What is starband 360  
gateway wireless modem or wireless network adapter?
0
 

Author Comment

by:123nitab
ID: 11720106
Sorry
Starband 360 is a satilite modem

Gatway is a wirless router

Thanks

123nitag
0
 
LVL 11

Expert Comment

by:Eric
ID: 11720227
So you have a PC

It has a starband connection for internet (usb?)

then you have  a network card with a eithernet cable (big phone plug 8 pin RJ45) plugged into a wireless gateway brand AP/router (what is the gateway model#?)
you have a laptop connecting wirelessly to the gateway Access point (AP)


if this is correct, it sounds like you need to do one of the following.
- setup your PC with ICS.   is it windows XP or 2000?

-if your starbadn is eithernet enabled maybe you can put your gateway router inbetween it and your network???? is it actually a router?


0
 

Author Comment

by:123nitab
ID: 11720346
xp on all

2 eathernet cards

Starband has to go the computer and not the router

Thanks

123
0
 
LVL 11

Accepted Solution

by:
Eric earned 500 total points
ID: 11720429
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Join & Write a Comment

#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

705 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now