Solved

Setting up guildFTPd behind a Dynalink RTA220 router

Posted on 2004-08-04
12
387 Views
Last Modified: 2008-01-09
I want to set up GuildFTPd behind a Dynalink RTA220 router. I've been stuffing around for almost a week, being able to connect internally (LAN), but not externally. At this point I'm not interested in learning a thing, I just want to make it work. please post an exact list of step by step instructions including setup for the router and the guildFTPd program, noting any things that may affect the setup (such as intrusion detection, in router)
I've been using port 30000, with passive range (trying to anyway) 30001->30020. I always get Connection Failure when trying to connect externally to ftp site. FTP program is WS-FTP pro.  The makers of my router were unsure how to do what I need - go figure.
Unless you know exactly how to fix my problem, don't reply

thx
adam
0
Comment
Question by:AdamJSawyer
  • 7
  • 5
12 Comments
 
LVL 5

Expert Comment

by:AshuraKnight
ID: 11723196
What type is your public ip address ? Dynamic or static ?

0
 

Author Comment

by:AdamJSawyer
ID: 11723202
dynamic, but i always know the address, it comes up in a toolbar on my taskbar - tends to change every couple of days
0
 

Author Comment

by:AdamJSawyer
ID: 11723261
if you want to try connecting:
    203.59.108.105:30000
but it won't work :(

adam
0
Does Powershell have you tied up in knots?

Managing Active Directory does not always have to be complicated.  If you are spending more time trying instead of doing, then it's time to look at something else. For nearly 20 years, AD admins around the world have used one tool for day-to-day AD management: Hyena. Discover why

 
LVL 5

Expert Comment

by:AshuraKnight
ID: 11723303
It's stopped when trying to list directories

Did you open the port for your passive range ?
0
 
LVL 5

Expert Comment

by:AshuraKnight
ID: 11723339
Not using passive mode :
------------------------------
Connecting to 203.59.108.105
Connected to 203.59.108.105 -> IP=203.59.108.105 PORT=30000
220-GuildFTPd FTP Server (c) 1997-2002
220-Version 0.999.9
220-Hi ppl. Download anything u need :)
220-cheers
220-adam
220 Please enter your name:
USER anonymous
331 User name okay, Need password.
PASS (hidden)
230 User logged in.
SYST
215 UNIX Type: L8 Server
REST 100
350 Restarting at byte offset 100.  Send RETR to initiate transfer.
REST 0
350 Restarting at byte offset 0.  Send RETR to initiate transfer.
PWD
257 "/" is current directory.
TYPE A
200 Type set to A.
PORT 192,168,1,7,26,214
200 PORT command successful.
LIST
150 Opening ASCII mode data connection for /bin/ls (51 bytes).
425 Can't build data connection.
List Error


=======================================================
http://www.guildftpd.com/help/html/userstuff/gui-linksys-setup.htm


And when I use passive mode, I'm getting data socket error :
From guildftp forum:
"if youre getting DATA SOCKET ERROR or CANT ESTABLISH DATA CONNECTION:

DSE is cause the client is in PASV mode where it should be PORT mode
CEDC is cause the client is in PORT mode where it should be PASV mode

If none of the methods works, then you have a misconfiguration somewhere between your PC with GFTPd and your Router.

Check that:

    * Your Router is forwarding ports to the correct LAN IP
    * Your GFTPd is set to the same ports as your Router
    * That if you have a Firewall, the same ports must be opened to the CORRECT LAN IP
    * GFTPd is set to use your Routers WAN (Internet) IP + Its the CORRECT one
    * You do NOT have any software installed that hijacks the ports after GFTPd started to use them
    * You do NOT have any software installed sharing the same ports/filtering the ports


Eventually try connect without your Router, (plug your RJ45 directly into your NIC)."


Gd luck :)
0
 

Author Comment

by:AdamJSawyer
ID: 11723369
try now... ?
adam
0
 

Author Comment

by:AdamJSawyer
ID: 11723377
when setting up passive ports.... i need a local IP and Netmask, and remote IP and NetMask... i know the local ones, but what about the remote ones ? is this for my ISP ?
thx
adam
0
 

Author Comment

by:AdamJSawyer
ID: 11723442
i'm sorry but I'm only a novice here... and don't understand what most of this means...
0
 

Author Comment

by:AdamJSawyer
ID: 11723580
I appreciate all the info, but I need to know HOW to do these things, not just that I have to do them.
adam
0
 
LVL 5

Expert Comment

by:AshuraKnight
ID: 11723589
ok i just saw pdf file how to set up port forwarding with your router :)

local ip address is your ip: (get it from run--> cmd --> ipconfig)
netmask is 255.255.255.0
remote ip address is your dsl connection ip address
netmask is depends on your ip address.
port range : 3000 - end
in bound and out bound : allow
protocol type : tcp ( i think )

why it's so complicated to setting port forwarding in dynalink -.-
with netgear i only need my ip, the port and description :P

0
 
LVL 5

Accepted Solution

by:
AshuraKnight earned 250 total points
ID: 11723594
btw passive mode : ftp server decide which port for each client
another mode is port mode where client connect to any port available
:)
0
 

Author Comment

by:AdamJSawyer
ID: 11729283
nothing i f*cking working.
i give up on this sh*t. Whoever invented routers needs a f*cking bullet in their head.
0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Best winter heavy coats 6 77
Which School? 2 51
Looking to replace current projector currently using a 4:3 screen 2 52
WinX Downloader fails to analyze. 10 40
Whether you believe the “gig economy,” as it has been dubbed, is the next big economic paradigm shift (https://www.theguardian.com/commentisfree/2015/jul/26/will-we-get-by-gig-economy) or an overstated trend (http://www.wsj.com/articles/proof-of-a-g…
If you get continual lockouts after changing your Active Directory password, there are several possible reasons.  Two of the most common are using other devices to access your email and stored passwords in the credential manager of windows.
Notifications on Experts Exchange help you keep track of your activity and updates in one place. Watch this video to learn how to use them on the site to quickly access the content that matters to you.
Where to go on the main page to find the job listings. How to apply to a job that you are interested in from the list that is featured on our Careers page.

831 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question