Solved

Setting up VPN

Posted on 2004-08-05
4
217 Views
Last Modified: 2010-04-17
Have just purchased 2 X Level One FBR1407 routers for a customer.Looking to setup a vpn between his house and the office with one of these at each end.Its so he can access documents,email etc.Any help much appreciated.
0
Comment
Question by:resolveitltd
  • 2
  • 2
4 Comments
 
LVL 27

Expert Comment

by:pseudocyber
ID: 11725038
I run our VPN at our company.  I've found VPN works better with MTU's on the clients, the interfaces, the links - everything set at 1430.

I'd recommend using 3DES Encryption or AES if you have it.  I guess you're going to use a shared key for authentication.

What else do you nee to know?

Is this his business?  Or does he just work there?  Do you need to get authorization from anyone at "the office" to attach a device to their network?  Security approvals?

0
 

Author Comment

by:resolveitltd
ID: 11727184
I've got total clearance to do what i have to do.......except its a first time for me.Proficient at setting up routers etc but this is new to me,itrs looking like a pretty steep learning curve!!
0
 
LVL 27

Accepted Solution

by:
pseudocyber earned 250 total points
ID: 11727220
It's a lot like setting up routers to talk to each other - it's almost the same - just NATting (maybe), authentication, and encryption methods.  Main thing is making sure your settings are the same on both ends.  Are you in Germany or Europe?  These seem to be European based on the only website I could uGooglize.  Are they routers or VPN concentrators/endpoints?
0
 

Author Comment

by:resolveitltd
ID: 11727545
they are routers c/w biult in firewall and printserver>we are in the uk if that makes a difference.Bought them via www.aldoussystems.co.uk
0

Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Cisco Router DMZ 5 90
configure ASA Vlan Interface 14 73
Cisco WRVS4400N 11 38
Port Forwarding 4 30
I have seen some questions on problems with SSH/telnet access to Cisco routers that may occur despite the fact that from a PC connected to your LAN, Internet connectivity is in place and users can access Internet sites without any issues.  There are…
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

830 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question