Solved

How much bandwidth and resources are hogged by a Jabber server?

Posted on 2004-08-06
2
246 Views
Last Modified: 2007-12-19
I am considering setting up a Jabber server on my dedicated server.  

It would be used for internal instant messanging for about 20 people.

What kind of bandwith and server resources will it likely use, both when users are logged on and idle or chatting?

Thanks!
0
Comment
Question by:hankknight
  • 2
2 Comments
 
LVL 5

Accepted Solution

by:
AshuraKnight earned 500 total points
ID: 11742291
Hmm I think it doesn't eat up too much bandwidth
As with msn messenger, it only eat 10mb d/l and 5 mb u/l for 3 months
It's with approx 3-4 hours a day to chat.

But if the users going to use video chat then ... I don't know :)
And as server resources just try to run it then you can see from taskmanager --> processes .

In my opinion, it's much easier and better to ask in Jabber forum.
The developer of this program will know for sure the statistics are.

Hope this help
Gd luck

0
 
LVL 5

Expert Comment

by:AshuraKnight
ID: 11742296
And if you want to measure it when you actually run the server.
You can use some kind of bandwidth monitor.
I'm using NetLimiter which could limit the bandwidth used and it also can keep statistic for d/l and u/l used.

0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

The DSL Parameters part of this article is valid and can be considered with any brand of internet router and modem (Dlink, 3com, Alcatel, Usrobotics, Parks), by accessing the configuration interface available by the manufacturer eg: http://10.1.1.1 …
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

708 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

16 Experts available now in Live!

Get 1:1 Help Now