Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

Problem with Exchange

Posted on 2004-08-09
12
265 Views
Last Modified: 2010-04-11
I have a problem... I have an Exchange 2003 with Exchange 5.5 in coexistence site... in the Event Viewer of Exchange 5.5 i have the next error:

Event Type:      Error
Event Source:      NETLOGON
Event Category:      None
Event ID:      5719
Date:            09/08/2004
Time:            09:13:17
User:            N/A
Computer:      Name Exchage 5.5
Description:
No Windows NT or Windows 2000 Domain Controller is available for domain Domain Name. The following error occurred:
The remote procedure call failed.

This error not permite that the users logon to their mailbox.

Please help me...

PD: Excuse my English

Rosita Andrade
0
Comment
Question by:jacc
  • 3
  • 3
  • 2
  • +3
12 Comments
 
LVL 15

Expert Comment

by:Yan_west
ID: 11754481
Usually, this happens when the rpc server is not available. You should have another error message in your event log.. something else that goes with this one..
0
 
LVL 15

Expert Comment

by:Yan_west
ID: 11754495
there is so many possibilities that goes with this error message, that we need additional info..
0
 
LVL 9

Expert Comment

by:SamuraiCrow
ID: 11754501
I haven't come across this particular issue before but I did find this KB on the microsoft site.  Does it describe your enviroment?

http://support.microsoft.com/default.aspx?scid=http://support.microsoft.com:80/support/kb/articles/Q180/1/14.ASP&NoWebContent=1
0
Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

 
LVL 15

Expert Comment

by:Yan_west
ID: 11754533
0
 
LVL 16

Expert Comment

by:Nyaema
ID: 11754721
Make sure the DNS server on the Windows NT server points to the same DNS server that the Windows 2003 server is using.
Also remove any WINS servers settings in the NT server
0
 
LVL 1

Expert Comment

by:dmorgan92
ID: 11756814
Have you updated your AD to 2003?  Are you in native or mixed mode?

dmorgan92
0
 

Author Comment

by:jacc
ID: 11785749
the active directory is in 2003
0
 
LVL 16

Expert Comment

by:Nyaema
ID: 11794857
Well Jacc, you did not confirm my last comment.
I'll assume that the NT Server is pointing to the same DNS server as the 2003 server.

The error suggest that the ntserver is not able to communicate with the 2003 server.

Now...

Are you able to ping the windows 2003 server from the NT Server

From the NT SERver
start->run
cmd
ping zz.yy.xx.ww

ping Win2003Server

Where zzz.yy.xx.ww is your windows 2003 Server.
And Win2003SErver is the name you have given to the windows 2003 server.

Please confirm the comments so that we can help you pinpoint the problem.

Please also post the results of ipconfig on both servers
0
 

Author Comment

by:jacc
ID: 11820207
Thanks everybody for your help, the problem was in WINS.
After change the cable, review the ip configuration.

for any reason the server did not convert ip to name. so, I try with the lmhost file and everything work fine.

thanks again for your help.
0
 
LVL 16

Expert Comment

by:Nyaema
ID: 12188651
Jacc surely I deserve points for pointing you in the right direction.
Not to mention you never responded to any of my comments of questions.
0
 

Accepted Solution

by:
CetusMOD earned 0 total points
ID: 12210988
Closed, 500 points refunded.
CetusMOD
Community Support Moderator
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

839 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question