?
Solved

NetScreen VPN Firewall

Posted on 2004-08-09
3
Medium Priority
?
1,298 Views
Last Modified: 2013-11-16
I am asking this on behalf of a firend.  She has a NetScreen VPN firewall (not sure which edition) and wants to put a rule on port 81, so that anything coming back to the public IP address of the firewall on port 81 will be forwarded to a private IP address on port 81, just wondering where and how to set this up with in NetScreen have been unable to find any information on exactly how to do this.
Thank you in advance.
0
Comment
Question by:wyogirl77
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 79

Expert Comment

by:lrmoore
ID: 11758580
If you can find out what model it is...
You might find the user's guide here:
http://www.juniper.net/techpubs/hardware/netscreen.html
0
 

Author Comment

by:wyogirl77
ID: 11763673
It is a NetScreen 25 VPN Firewall and I looked at the User's Guide and it was not clear on how toset this up, and ideas?
0
 
LVL 79

Accepted Solution

by:
lrmoore earned 100 total points
ID: 11763894
Depending on the operating system version, you might find help in these guides.
http://www.juniper.net/techpubs/software/screenos/screenos5x/

I'm sorry, but I don't have any experience with the Netscreen. After looking around their web site and looking at the user guides, I'm confused, too. It should be such a simple thing to setup a port forwarding. Can you get into the web GUI? Poke around and see if you can find anything NAT/port forwrding.

Hopefully, someone in this forum with Netscreen experience can help more than I can...
0

Featured Post

On Demand Webinar - Networking for the Cloud Era

This webinar discusses:
-Common barriers companies experience when moving to the cloud
-How SD-WAN changes the way we look at networks
-Best practices customers should employ moving forward with cloud migration
-What happens behind the scenes of SteelConnect’s one-click button

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If you are like regular user of computer nowadays, a good bet that your home computer is on right now, all exposed to world of Internet to be exploited by somebody you do not know and you never will. Internet security issues has been getting worse d…
To setup a SonicWALL for policy based routing to be used with the Websense Content Gateway there are several steps that need to be completed. Below is a rough guide for accomplishing this. One thing of note is this guide is intended to assist in the…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…
Have you created a query with information for a calendar? ... and then, abra-cadabra, the calendar is done?! I am going to show you how to make that happen. Visualize your data!  ... really see it To use the code to create a calendar from a q…
Suggested Courses
Course of the Month12 days, 19 hours left to enroll

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question