Solved

how can I make Multiple VPN tunnles through fedora

Posted on 2004-08-09
4
361 Views
Last Modified: 2011-09-20
Hi All,
I have a Linux machine "Fedora Core 2" kernel version 2.6.5-1.358, this machine has two network interfaces eth0 and eth1. eth0 is connected to the WAN side and eth1 is connected to the LAN side.

I have a number of windows xp machines on the LAN side connected to the linux machine, and I have VPN server connected to the WAN side.

How can I make the windows xp machines on the LAN get connected by using VPN to the VPN server at the same time through the linux machine?

Your support is highly appreciated

Regards
Bassam

0
Comment
Question by:Bassam72
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
4 Comments
 
LVL 4

Expert Comment

by:nagraves
ID: 11818129
The linux box should have an IP as its VPN entry point.
Try setting the default gateway on your windows boxes as that IP.
0
 
LVL 4

Accepted Solution

by:
nagraves earned 50 total points
ID: 11818171
On each windows box do the following
Start -> run
    Type:  cmd
    Click OK
    type: ipconfig /all
    take note of your Ip address, subnet mask, dns servers

Network Connections ->
    Right click appropriate network icon ->
    Properties

In "This connection uses the following items:"
   single click on "Internet Protocol (TCP/IP)"
   click Properties

Choose "Use the following IP address"
   enter your current ip address
   enter your current subnet mask
   enter the IP addy of the VPN entry point as the default gateway
   enter your dns servers

Click OK, click OK again.
I have somewhat the same setup, and this is how I do it. On my linux box I use the cisco vpn client, and have a windows box connect through that vpn tunnel as well as the linux box. Hope that helps
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
If you're a developer or IT admin, you’re probably tasked with managing multiple websites, servers, applications, and levels of security on a daily basis. While this can be extremely time consuming, it can also be frustrating when systems aren't wor…
This is my first video review of Microsoft Bookings, I will be doing a part two with a bit more information, but wanted to get this out to you folks.
Suggested Courses

628 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question