Solved

networking with files

Posted on 2004-08-11
5
173 Views
Last Modified: 2013-11-15
Problem using network files.

I have a file on my C:\ drive and have no problems opening it and modifying it.  Once I put it on the network and try to access it I get frozen up and have to reboot.
I then copy it to my C:\ drive again and it works fine. My co worker has the same problem with these file on the network.  It seems to happen only to Quattro Pro files.  Excel works fine.

I have to share these files and I'm wondering if this is my network problem or Quattro Pro.

Can anyone help?  I'm not getting errors to show
0
Comment
Question by:seamus2003
  • 2
5 Comments
 
LVL 6

Expert Comment

by:vand
ID: 11772836
In the properties of the file, under the security tab do you see any unresolved SIDS?

You could also try to make a local copy, modify the permissions while local (as a test give everyone full-control and remove everything else) move to the network and try again.
0
 

Author Comment

by:seamus2003
ID: 11773033
I don't see where i would see unresolved SIDs
0
 
LVL 6

Accepted Solution

by:
vand earned 250 total points
ID: 11774816
In the security tab, there should be names ie administrator not (s-192-234-653 etc)
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
Most of the applications these days are on Cloud. Cloud is ubiquitous with many service providers in the market. Since it has many benefits such as cost reduction, software updates, remote access, disaster recovery and much more.
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

803 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question