Solved

Windows 2000 peer2peer

Posted on 2004-08-17
6
192 Views
Last Modified: 2010-07-27
Hello
I have 2 computers
The first:
Laptop with win2k pro,
Under Network and Dailup Connection:
Some internet accounts, Local Area Connection.
192.168.0.1

The second:
A desktop with win2k pro,
Under network and dail up connection on, I have Make New Connection, and Local Area Connection 3
192.168.0.2

Using a crossover cable to connect them. The icon on both of them shows the status being connected on 100Mbps, both subnets are 255.255.255.0
User accounts are ok, both on the same Workgroup

Now each computer sees itself but not the other. And when they see each other, the transfer is v…….e…….r……y  slow

Thanks for helping.

0
Comment
Question by:samj
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
6 Comments
 
LVL 31

Expert Comment

by:merowinger
ID: 11828094
hi,
- look in the network card settings if your dublex mode is set to auto (right click my network places -> properties -> right click your lan connection -> properties ->  configure -> advanced -> dublecxmode (it should be on both set to 100 MBit Full, or Auto)
- look if a firewall blocks the connection
- also configure on both pc as default gateway the other pc in the workgroup
- check if your third Local Area Connection is used for you peer to peer network

mero
0
 
LVL 7

Expert Comment

by:dttri
ID: 11828473
 Hello,
  Have you installed NetBEUI protocol? In the past, I have a similar problem like you. My computers can't see each other (ping not reply), but after I install NetBEUI, everything is OK. Maybe this is the case.

  Tri
0
 
LVL 1

Expert Comment

by:shaineerken
ID: 11828555
if you tried what merowinger has said and still not ready. Try checking your crossover cable.
0
 

Author Comment

by:samj
ID: 11828647
here is what I did, it is fixed but I don't know why and how.
I shutdown both boxes, restarted both again. gave adimn password and left them for 1 hr. came back and both are connecting up to speed no problem. I did not do any thing different than what I did before execpt to leave them that long to merry-up.

I did not do merowinger  suggesgtions yet, would be interesting to know, but sine the desttop is runing linux not, and my long in to the lap top would not allow me admin access. I will leave it at that, thanks
I will ask to paq and refund if no objections from any body.

0
 
LVL 5

Accepted Solution

by:
Netminder earned 0 total points
ID: 11866616
Closed, 125 points refunded.
Netminder
Site Admin
0

Featured Post

Building an interactive eFuture classroom

Watch and learn how ATEN provided a total control system solution including seamless switching matrix switch, HDBaseT extenders, PDU, lighting control to build an interactive eFuture classroom.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Hidden network 2 43
Boot Camp 3 59
Network bogged down - slowing down some client PCs 10 41
HP Storage and Cisco Nexus 4 11
This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

726 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question