Solved

VPN via ISDN

Posted on 2004-08-18
3
446 Views
Last Modified: 2012-05-05
Hello.  I'm trying to setup a VPN solution for an outfit that has no dsl or T1 access.  they have only ISDN.  they are using a netgear ISDN modem that does not support VPN passthrough.  I'm wanting to find out if there is an ISDN modem/router that has VPN/IPSEC built in.  If not, what is the best way to accomplish this?  they will be connecting to another location that has DSL and a dlink dsl/vpn router using IPSEC with DES encryption.  i've not found an isdn modem/router that will support this.  basically, what is the best way to setup a VPN to this location that has only ISDN?
thanks in advance! :)
0
Comment
Question by:linuxman25
  • 2
3 Comments
 
LVL 36

Expert Comment

by:grblades
ID: 11834424
Hi linuxman25,
There are lots of Cisco routers with ISDN interfaces. How about one of the 800 series?
http://www.cisco.com/en/US/products/hw/routers/ps380/products_data_sheet09186a008008872c.html
0
 

Author Comment

by:linuxman25
ID: 11834803
I checked that out.  looks nice but there is only one public ip address that they have.  this device needs to be able to offer internet access through the LAN port with a private ip address like 192.168.10.x and dish out ip addresses to the other systems.  I suppose it could do this with NAT?
i've read where NAT and ipsec don't work well together on the cisco routers.
0
 
LVL 36

Accepted Solution

by:
grblades earned 500 total points
ID: 11834889
Have a look at this configuration guide:-
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094498.shtml
The example is between a router running NAT and IPSEC VPN to a Cisco PIX. The router configuration should be almost identical going to the dlink.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Site to Site VPN - Cisco ASA - Multiple Subnets at Main Location 6 89
VPN speed and 3rd party service 13 51
Microsoft VPN Client error 7 36
VPN issue 2 59
Preface Having the need * to contact many different companies with different infrastructures * do remote maintenance in their network required us to implement a more flexible routing solution. As RAS, PPTP, L2TP and VPN Client connections are no…
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

778 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question