Solved

Hex radix data entry

Posted on 2004-08-18
6
1,195 Views
Last Modified: 2012-05-05
How do I enter Hex radix in the value data?
 
The following is a solution for Netlogon 5719
Try the following on your server:
START | RUN | REGEDIT
navigate to:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters

Add Value: MaxDgramBuffering
Type: REG_DWORD
Set data value to: 0x40000 (256K), using the Hex radix. The default for this Value Name is 0x20000 (128K) and the range is 0 - 0xFFFFFFFF

0
Comment
Question by:topliu
  • 3
  • 3
6 Comments
 
LVL 18

Expert Comment

by:Crash2100
ID: 11834879
First you create the DWORD value.  Then in it's properties, set the base as hexidecimal.

And I think the you should set the value 40000 for the first.  And 20000 for the second.
0
 

Author Comment

by:topliu
ID: 11835416
Crash2100

I created MaxDgramBuffering
I created DWord Value
However, I can only add one hexidecimal value.  When I set the value to 40000, then I get 0x40000(16384)

I do not understand what the 20000 is for.  Do I set it to the 40000 or use the default value?

Thank you
0
 
LVL 18

Accepted Solution

by:
Crash2100 earned 50 total points
ID: 11835594
Sorry, I misunderstood what you had posted.  It says to set the value to 40000.  There is no second setting.  I thought it was referring to something else when it referred to the default value.

You said you got 0x40000(16384)?  I think you need another zero on the end of that.  It should be 0x00040000 (262144).

By the way, why are you trying to change this?  And where are you getting these setting suggestions from?
0
Simplifying Server Workload Migrations

This use case outlines the migration challenges that organizations face and how the Acronis AnyData Engine supports physical-to-physical (P2P), physical-to-virtual (P2V), virtual to physical (V2P), and cross-virtual (V2V) migration scenarios to address these challenges.

 

Author Comment

by:topliu
ID: 11835983
thank you, I now have 0x00040000(26144)

The reason why I am trying to change this is because it is an accepted answer on this website to resolve"

Netlogon EventID 5719.  I believe it is stated in the first post.  thanks
0
 

Author Comment

by:topliu
ID: 11875011
It did not resolve my primary netlogin EventID 5719 but nevertheless, thank you for your help.  I entered the hex radix info.
0
 
LVL 18

Expert Comment

by:Crash2100
ID: 11881004
Glad I could help!
0

Featured Post

Enterprise Mobility and BYOD For Dummies

Like “For Dummies” books, you can read this in whatever order you choose and learn about mobility and BYOD; and how to put a competitive mobile infrastructure in place. Developed for SMBs and large enterprises alike, you will find helpful use cases, planning, and implementation.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Are you unable to synchronize your OST (Offline Storage Table) file with Microsoft Exchange Server? Is your OST file exceeding 2 GB size limit? In Microsoft Outlook 2002 and earlier versions, there is a 2 GB size limit for the OST file. If the file …
Sometimes people don't understand why download speed shows differently for Windows than Linux.Specially, this article covers and shows the solution for throughput difference for Windows than a Linux machine. For this, I arranged a test scenario.I…
Two types of users will appreciate AOMEI Backupper Pro: 1 - Those with PCIe drives (and haven't found cloning software that works on them). 2 - Those who want a fast clone of their boot drive (no re-boots needed) and it can clone your drive wh…
The Email Laundry PDF encryption service allows companies to send confidential encrypted  emails to anybody. The PDF document can also contain attachments that are embedded in the encrypted PDF. The password is randomly generated by The Email Laundr…

785 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question