Solved

Need to setup VPN on PIX 515

Posted on 2004-08-18
4
162 Views
Last Modified: 2013-11-16
I have a Pix 515 firewall, and would like to setup some type of VPN access to it for remote access (using the Cisco VPN Client).

Behind the PIX is a Windows Small Business Server 2003 (standard). There is not a RADIUS server setup. Is there any way to set it up to authenticate to the PIX instead of a RADIUS server?

Any websites or input is appreciated.

RK
0
Comment
Question by:ronniekurtz
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 4
4 Comments
 
LVL 79

Expert Comment

by:lrmoore
ID: 11836845
0
 
LVL 79

Expert Comment

by:lrmoore
ID: 11836853
Change this:
>crypto map mymap client authentication AuthInbound

to local:
crypto map mymap client authentication Local
and add username/passwords to the PIX

username xxxxx password yyyyyyy


0
 
LVL 79

Accepted Solution

by:
lrmoore earned 125 total points
ID: 11836859
By the way, Win2003 does have Radius. It's called Internet Authentication Service - IAS
2003 is almost identical to 2000
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00800b6099.shtml
0
 
LVL 79

Expert Comment

by:lrmoore
ID: 12092765
Are you still working on this? Do you need more information?
Can you close out this question?
0

Featured Post

Forrester Webinar: xMatters Delivers 261% ROI

Guest speaker Dean Davison, Forrester Principal Consultant, explains how a Fortune 500 communication company using xMatters found these results: Achieved a 261% ROI, Experienced $753,280 in net present value benefits over 3 years and Reduced MTTR by 91% for tier 1 incidents.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Have you experienced traffic destined through a Cisco ASA firewall disappears and you do not know if the traffic stops in the firewall or somewhere else? The solution is the capture feature. This feature was released in 6.2(1) and works in all firew…
From Cisco ASA version 8.3, the Network Address Translation (NAT) configuration has been completely redesigned and it may be helpful to have the syntax configuration for both at a glance. You may as well want to read official Cisco published AS…
As a trusted technology advisor to your customers you are likely getting the daily question of, ‘should I put this in the cloud?’ As customer demands for cloud services increases, companies will see a shift from traditional buying patterns to new…
Both in life and business – not all partnerships are created equal. Spend 30 short minutes with us to learn:   • Key questions to ask when considering a partnership to accelerate your business into the cloud • Pitfalls and mistakes other partners…

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question