Solved

Very slow connection to internet (I'm on cable)

Posted on 2004-08-19
1
133 Views
Last Modified: 2010-04-11
I'm on cable and have a few routers in my house (lab). Basically my setup is like this:

<---cable modem---->  <---cable router----->  <----cisco router-----><------switch------> Network 1 users
                                                                                 |
                                                                                 |
                                                                                 |
                                                                    <-----2nd Cisco Router--->                                                                    
                                                                                 |            
                                                                                 |
                                                                    <--------WAP-------->
                                                                         Network 2 users


Basically, any user on Network 1 has no problem. Get about 300kbps download speed. However, users in Network 2 are getting 59kbps!!!  What is up with that.   Netowrk 2 users are wireless yes, but they have full strength.  Also, things didnt get like this until I added a switch in network 1. Any ideas?

thanks
0
Comment
Question by:dissolved
1 Comment
 
LVL 7

Accepted Solution

by:
EmpKent earned 500 total points
ID: 11849134
Remove switch in Net 1 and see if it corrects the issue.

If so, focus on it. Is there a loop? Is STP running?

If not, is Cisco router #1 performing proxy arp or something else that would interfere with router #2?

Are you NATting in 1 or 2? Is the cable router you mention NATting? Is it necessary? Cisco 1 can do anything it is doing... (except perhaps a second eth for $50...)

Kent
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

When it comes to security, there are always trade-offs between security and convenience/ease of administration. This article examines some of the main pros and cons of using key authentication vs password authentication for hosting an SFTP server.
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

861 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question