Still celebrating National IT Professionals Day with 3 months of free Premium Membership. Use Code ITDAY17

x
?
Solved

Netscreen 5XT VPN client access

Posted on 2004-08-20
8
Medium Priority
?
472 Views
Last Modified: 2008-03-06
Hi,

does anyone has any inormation on how to set up client side VPN on a Netscreen 5XT? I have one of those on my network border an I want to use VPN so I can access my network behind it.

Greetz,
Vince
0
Comment
Question by:VMarcus
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
8 Comments
 
LVL 36

Expert Comment

by:grblades
ID: 11870303
Do you have the client software and VPN licenses?
See http://www.juniper.net/products/integrated/dsheet/ds_remote.pdf
0
 
LVL 2

Author Comment

by:VMarcus
ID: 12246902
Good question,
I bought it second hand. Is there a way I can check this in the  configuration?
0
 
LVL 36

Expert Comment

by:grblades
ID: 12338493
Sorry for the delay.I was on holiday.

I don't know if you can check the configuration as I don't really know much about their products. I just found the PDF and thought it might be usefull.
0
What does it mean to be "Always On"?

Is your cloud always on? With an Always On cloud you won't have to worry about downtime for maintenance or software application code updates, ensuring that your bottom line isn't affected.

 

Expert Comment

by:Tom-at-Spectrum
ID: 12566018
Hi VMarcus:

First off, you won't be able to run the VPN (at least not easily) without having a static IP address for the NS-5XT's Untrust interface, so make sure have that from your ISP.

After that, you can either purchase IPSec-compatible VPN client software for your PC, or use a more public type of protocol like PPTP or L2TP to encrypt the traffic into your network.  The documentation for these is available from NetScreen's website, but they may require a support contract--only about US$100/year.  The best doc on their site for practical solutions like this is the Concepts and Examples Guide.

I'd *strongly* recommend a support contract anyway so you can get firmware upgrades.  Some of them fix significant problems, and you would be able to call them for assistance, too.

HTH
0
 
LVL 9

Expert Comment

by:jabiii
ID: 15429092
There are multiple ways of setting up client-box VPN tunnels for NS here is one.....

http://5xt.support.netscreen.safeharbor.com/knowbase/root/public/ns4295.htm?

and make sure you register with Juniper. for your support. it's always better safe than sorry.....
http://www.juniper.net/customers/support/
0
 
LVL 9

Expert Comment

by:jabiii
ID: 15562233
I forgot about  this one :)

0
 
LVL 1

Accepted Solution

by:
Computer101 earned 0 total points
ID: 15584320
PAQed with no points refunded (of 50)



Computer101
EE Admin
0

Featured Post

Optimum High-Definition Video Viewing and Control

The ATEN VM0404HA 4x4 4K HDMI Matrix Switch supports 4K resolutions of UHD (3840 x 2160) and DCI (4096 x 2160) with refresh rates of 30 Hz (4:4:4) and 60 Hz (4:2:0). It is ideal for applications where the routing of 4K digital signals is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I've had to do a bit of research to setup my VPN connection so that Clients can access Windows Server 2008 network shares.  I have a Cisco ASA 5510 firewall.  I found an article which was extremely useful: It had a solution if you use ASDM to config…
Like many others, when I created a Windows 2008 RRAS VPN server, I connected via PPTP, and still do, but there are problems that can arise from solely using PPTP.  One particular problem was that the CFO of the company used a Virgin Broadband Wirele…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

704 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question