Solved

Some command on Nat?

Posted on 2004-08-20
3
231 Views
Last Modified: 2010-04-11
I have just read about Nat. And I don't understand some commands:
 1)ip nat inside source route-map a pool b
 2)ip nat inside source static 1.1.1.1 2.2.2.2 extendable
 3)ip nat inside source static 1.1.1.1 2.2.2.2 no-alias
Can you explain these commands for me. Thanks a lot
0
Comment
Question by:itman04
3 Comments
 
LVL 9

Accepted Solution

by:
BigC666 earned 500 total points
ID: 11861380
howdy,

have a look here http://www.cisco.com/warp/public/471/ALTIGAR.html

hope that this helps
0

Featured Post

Free Tool: Site Down Detector

Helpful to verify reports of your own downtime, or to double check a downed website you are trying to access.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Even if you have implemented a Mobile Device Management solution company wide, it is a good idea to make sure you are taking into account all of the major risks to your electronic protected health information (ePHI).
This article will inform Clients about common and important expectations from the freelancers (Experts) who are looking at your Gig.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

789 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question