Celebrate National IT Professionals Day with 3 months of free Premium Membership. Use Code ITDAY17

x
?
Solved

ISA not allowing connection to Bank Server (Firewall)

Posted on 2004-08-22
1
Medium Priority
?
776 Views
Last Modified: 2013-11-16
Hi there,

I will do my best to explain the issue:

We have a Proxy Server with ISA Server installed. I need to allow communication through TCP Port 6025 to access a Bank Server from a client PC. I have tried various steps to no avail, but would like someone that knows what they're talking about to tell me what I need to do first.

Our Proxy/ISA Server is on IP 10.10.20.14 . If I run cmd.exe and type:

telnet deskbank1.westpac.co.nz 6025

... from the Proxy/ISA Server itself, It will respond as it should by promting a blank screen. I then type HELP as per Westpac support's intructions and hit Enter. This then replies with a bunch on wierd characters and states that the connection is lost. This means that the connection is fine from the Proxy/ISA Server. If I do the same from a client PC, there is an error.

How do I allow this port to be available for client PC's? Please help as this is quite urgent.
0
Comment
Question by:Fernando
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 3

Accepted Solution

by:
iwontleaveyou earned 1500 total points
ID: 11867498
Well for this you need to create a firewall/Access rule at the ISA server which allow all outbound traffic through the specific port.
For this either you search in the manual to how to create access rules or you tell me which version of ISA u r using if it is ISA 2004 the its very simple to create this rule you can even download the 120 days trial of ISA 2004 form Microsoft's site http://www.microsoft.com/ISAServer/
0

Featured Post

New benefit for Premium Members - Upgrade now!

Ready to get started with anonymous questions today? It's easy! Learn more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
Michael from AdRem Software outlines event notifications and Automatic Corrective Actions in network monitoring. Automatic Corrective Actions are scripts, which can automatically run upon discovery of a certain undesirable condition in your network.…
Monitoring a network: how to monitor network services and why? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the philosophy behind service monitoring and why a handshake validation is critical in network monitoring. Software utilized …
Suggested Courses

730 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question