Solved

Unable to create connection to Linksys Router

Posted on 2004-08-23
2
328 Views
Last Modified: 2008-01-09
My Configuration

I'm trying to setup a vpn connection from my laptop to my home machine
Router  - Linksys router RV042, must be new not much help at linksys
XP Professional on Laptop
Home office is Windows 2000
The home network and the laptop are connected by Comcast with DHCP
I've configured at new VPN Connection from the laptop for VPN also IPSEC

When I initiate the connection I get this error, that I don't understand

Aug 23 08:16:41 2004     VPN Log    No suitable connection for peer '192.168.2.100', Please check Phase 1 ID value  

I don't know where 192.168.2.100 is coming from.  The address of the Windows 2000 system is 192.168.2.101.  

I attached the log prior to the error in case it helps

I'd appreciate your help I'm getting really confused

Aug 23 08:16:40 2004    Connection Accepted    TCP 67.169.143.76:1091->24.4.140.115:1723 on ixp1
Aug 23 08:16:40 2004     VPN Log    Ignoring Vendor ID payload Type = [MS NT5 ISAKMPOAKLEY 00000003]  
Aug 23 08:16:40 2004     VPN Log    [Tunnel Negotiation Info] <<< Responder Received Main Mode 1st packet  
Aug 23 08:16:40 2004     VPN Log    [Tunnel Negotiation Info] >>> Responder Send Main Mode 2nd packet  
Aug 23 08:16:41 2004     VPN Log    [Tunnel Negotiation Info] <<< Responder Received Main Mode 3rd packet  
Aug 23 08:16:41 2004     VPN Log    [Tunnel Negotiation Info] >>> Responder send Main Mode 4th packet  
Aug 23 08:16:41 2004     VPN Log    [Tunnel Negotiation Info] <<< Responder Received Main Mode 5th packet  
Aug 23 08:16:41 2004     VPN Log    Main mode peer ID is ID_IPV4_ADDR: '192.168.2.100'  
Aug 23 08:16:41 2004     VPN Log    No suitable connection for peer '192.168.2.100', Please check Phase 1 ID value  


Thanks


0
Comment
Question by:c7c4c7
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 

Author Comment

by:c7c4c7
ID: 11872733
O.K. so, I just realized where that address is coming from.  Its the DHCP address of the laptop.

So the question changes a bit ..... Now the question is what is the real problem and how do I fix it??

Thanks
0
 
LVL 79

Accepted Solution

by:
lrmoore earned 500 total points
ID: 11875432
Let's just keep one thread open. This is the same issue:

http://www.experts-exchange.com/Networking/Broadband/VPN/Q_21104202.html

Once we get you resolved, you can post in Community Support to have this question deleted and your points refunded.

0

Featured Post

Simple, centralized multimedia control

Watch and learn to see how ATEN provided an easy and effective way for three jointly-owned pubs to control the 60 televisions located across their three venues utilizing the ATEN Control System, Modular Matrix Switch and HDBaseT extenders.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Sometimes, you want your microsoft VPN to route all the traffic to the remote network. Usually your employer network. This makes it possible to access all the nodes inside this remote LAN, even if they have no "public DNS" entries. To do so, you wo…
When you connect to your workplace's VPN, you may not notice that you are using your workplace's servers to serve up webpages.  This might be undesirable since the workplace can log all the places you've been.  It also might be very slow to load pag…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

749 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question