Solved

Redundant Internet Connections 1 Cable 1 DSL How to Setup DNS

Posted on 2004-08-23
1
399 Views
Last Modified: 2013-12-24
I have two internet connections for redundancy. Both go through a dual wan Linksys Router. The cable connection has a dynamic IP and the DSL has a static IP. I am going to be hosting my own email, web server, and considering DNS. I am wondering whether I should outsource my DNS with say DYNDNS.org and how I would setup so that there is redundancy between the connections?
0
Comment
Question by:FASTECHS
1 Comment
 
LVL 33

Accepted Solution

by:
humeniuk earned 500 total points
ID: 11894567
Sorry, just a suggestion rather than an answer.  Since you haven't had any responses yet here, you may want to consider moving this question to one of the networking TA's for a better response.

You can also look at www.urec.cnrs.fr/publications/ network-redundancy-v-u-1.pdf, which "describes how to set-up a network redundancy for service machines which have to be accessible 24/7 by all clients over the Internet".  There is some DNS info, but not a lot.  However, it might point you in the right direction.
0

Featured Post

Save on storage to protect fatherhood memories

You're the dad who has everything. This Father's Day, make sure your family memories are protected. My Passport Ultra has automatic backup and password protection to keep your cherished photos and videos safe. With up to 3TB, you have plenty of room to hold the adventures ahead.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Short answer to this question: there is no effective WiFi manager in iOS devices as seen in Windows WiFi or Macbook OSx WiFi management, but this article will try and provide some amicable solutions to better suite your needs.
ADCs have gained traction within the last decade, largely due to increased demand for legacy load balancing appliances to handle more advanced application delivery requirements and improve application performance.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

920 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

16 Experts available now in Live!

Get 1:1 Help Now