Solved

WINS error

Posted on 2004-08-24
3
336 Views
Last Modified: 2010-04-11
I configured a wins server today but have problems with the replication.
It only replicated one way .... server error log is pasted below.

Event Type:      Error
Event Source:      Wins
Event Category:      None
Event ID:      4243
Date:            8/24/2004
Time:            1:32:12 PM
User:            N/A
Computer:*********
Description:
WINS Pull thread encountered an error during the process of sending a push  notification to another WINS. The error code is given in the data section.
Data:
0000: 04 0a 00 00 08 00 00 e0   .......à

what else can I provide for information to help solve this...???
0
Comment
Question by:mustangcoupe
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 15

Accepted Solution

by:
Yan_west earned 500 total points
ID: 11885161
Make sure that you configure each server to point to itself.
Each WINS server that you install on your network must register its own set of unique names and group NetBIOS names in WINS.
WINS service problems may occur if different WINS servers own the names that a particular WINS server registers. To prevent these problems, configure each WINS server as its own primary WINS server and secondary WINS server.

If the above does not help you follow this action plan:
Try Stopping and Starting the WINS service on the affected servers.    
In WINS Manager, click Configuration on the Server menu: Ensure that the Replicate On Address Change check box is cleared for ALL servers.
Break replication (On all servers)
Run Consistency Checker on all WINS servers. (Verify Database Consistency and Verify Version ID Consistency). See Q145881.

If this does not work, your last option is to manually recreate a WINS database for all your wins servers. See Q168712.  
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q145881
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q168712
0
 
LVL 15

Expert Comment

by:Yan_west
ID: 11885176
also:
Troubleshooting WINS error event ID 4102, 4243, 4242, and 4286 messages
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q321208

Recommended Practices for WINS
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q185786

0
 

Author Comment

by:mustangcoupe
ID: 11892093
turned out to be the second server not having the WINS address(itself) in the static settings....
0

Featured Post

Industry Leaders: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Wireshark question 1 44
Datacenter Upgrade - Design Question 5 63
PXE boot for ESXi on CENTOS 7 25 114
VPN Exposure 19 43
Even if you have implemented a Mobile Device Management solution company wide, it is a good idea to make sure you are taking into account all of the major risks to your electronic protected health information (ePHI).
Meet the world's only “Transparent Cloud™” from Superb Internet Corporation. Now, you can experience firsthand a cloud platform that consistently outperforms Amazon Web Services (AWS), IBM’s Softlayer, and Microsoft’s Azure when it comes to CPU and …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

751 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question