Solved

Changing  a port forward on a pix firewall, HELP!

Posted on 2004-08-25
3
375 Views
Last Modified: 2013-11-16
Hello all, I am going to be on site babysitting a network this week and I have to change 1 thing on a pix firewall but have limited background when it comes to pix firewall.

All I have to change is one portforward here is what I have to change

Port 80 is currently pointing at 192.168.1.200
and I have to change it to point at 192.168.1.201

Can somone give me a crash course?  Or help me out in anyway? I would greatly apreciate it.  I have a computer connected to the console port on the back of the unit and logged in.
0
Comment
Question by:janderson2k
  • 3
3 Comments
 
LVL 79

Accepted Solution

by:
lrmoore earned 250 total points
ID: 11893164
There should be a static translation looks something like this in the config:

static (inside,outside) tcp <public ip> www 192.168.1.200 netmask 255.255.255.255 0 0

To change it, you need to clear all xlates, add a new one, then remove the old one, and clear xlates again, and save it:

pix#config term
pix(config)#clear xlate
pix(config)#no static (inside,outside) tcp <public ip> www 192.168.1.200 netmask 255.255.255.255 0 0
pix(config)#static (inside,outside) tcp <public ip> www 192.168.1.201 netmask 255.255.255.255
pix(config)#clear xlate
pix(config)#exit
pix#writ mem

0
 
LVL 79

Expert Comment

by:lrmoore
ID: 12092756
Are you still working on this? Do you need more information?
Can you close out this question?
0
 
LVL 79

Expert Comment

by:lrmoore
ID: 13703129
How's it going? Have you found a solution? Do you need more information?
Can you close this question?

http://www.experts-exchange.com/help.jsp#hs5

Thanks for attending to this long-forgotten question.

<-8}
0

Featured Post

Control application downtime with dependency maps

Visualize the interdependencies between application components better with Applications Manager's automated application discovery and dependency mapping feature. Resolve performance issues faster by quickly isolating problematic components.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Can Cisco resolve internet address internally 4 31
Cisco Sup720 Migrate to Sup2T 5 55
Root STP in Cisco switch maintenance 2 46
Open a port on Cisco Router 1941 23 35
To setup a SonicWALL for policy based routing to be used with the Websense Content Gateway there are several steps that need to be completed. Below is a rough guide for accomplishing this. One thing of note is this guide is intended to assist in the…
From Cisco ASA version 8.3, the Network Address Translation (NAT) configuration has been completely redesigned and it may be helpful to have the syntax configuration for both at a glance. You may as well want to read official Cisco published AS…
Both in life and business – not all partnerships are created equal. As the demand for cloud services increases, so do the number of self-proclaimed cloud partners. Asking the right questions up front in the partnership, will enable both parties …
As a trusted technology advisor to your customers you are likely getting the daily question of, ‘should I put this in the cloud?’ As customer demands for cloud services increases, companies will see a shift from traditional buying patterns to new…

912 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

26 Experts available now in Live!

Get 1:1 Help Now