Solved

Reset Maintenance count on HP 4100 MFP

Posted on 2004-08-26
1
576 Views
Last Modified: 2012-08-14
Hi EE, I have just changed the maintenance kit on a 4100MFP but cant seem to figure out how to set the maintenance count.  Any ideas?
0
Comment
Question by:aduhwale
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 5

Accepted Solution

by:
pysches earned 125 total points
ID: 11910678
try this..

At the printer control panel, press and hold down the left side of the Item and -Value+ buttons while turning the printer on.

Release the buttons on the control panel when RESET MAINT COUNT appears in the display.


to ensure that it has worked just pritn a config page..
0

Featured Post

Building an interactive eFuture classroom

Watch and learn how ATEN provided a total control system solution including seamless switching matrix switch, HDBaseT extenders, PDU, lighting control to build an interactive eFuture classroom.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Causes of paper jams:The following are the main causes of paper jams. Guides:If the guides for the paper are not set correctly they may cause the paper to enter at an angle. You should ensure that the guides are set correctly for the paper type a…
When I recently replaced my image transfer kit on my office HP color laserjet 5550dn printer, I had a slight problem.  The left bracket that holds the transfer kit got stuck in the upright locked position instead of being at a 45 degree angle facing…
In an interesting question (https://www.experts-exchange.com/questions/29008360/) here at Experts Exchange, a member asked how to split a single image into multiple images. The primary usage for this is to place many photographs on a flatbed scanner…

752 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question