Solved

how to disable telnet in Hp printer

Posted on 2004-08-27
11
2,640 Views
Last Modified: 2009-12-16
Hi all,
        Plese tell me step by step how to disable telnet in Hp printer.

Shahnaz
0
Comment
Question by:alshahnaz
  • 7
  • 2
  • 2
11 Comments
 
LVL 2

Expert Comment

by:TheBrothaULuv2H8
ID: 11912438
If you are running the latest firmwares TELNET can be disabled via the JetDirects Embedded Wed Server (Other Settings page).

Since you have telnet enabled by default the webpage is probably enabled by default.  Launch a browser and go to the IP address of the printer, go to the other settings page, then disable telnet.
0
 
LVL 7

Author Comment

by:alshahnaz
ID: 11938491
hye buddy,
i saw using browser but cant see anthing called other seetings in the page.

Shahnaz
0
 
LVL 2

Expert Comment

by:TheBrothaULuv2H8
ID: 11940802
Depending on which version/driver you're using you may not see the same things I am seeing.  Just look around through the page(s) try to find the option to disable TELNET.
0
Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

 
LVL 7

Author Comment

by:alshahnaz
ID: 11941868
i have seen all over the page,but there is nowwhere there is option to disable th telnet.
Pls assist.

Shahnaz
0
 
LVL 7

Author Comment

by:alshahnaz
ID: 11941994
i also checked my firmware it is lates
the version that i have is G.08.49.

Please asist.
Shahnaz
0
 
LVL 7

Author Comment

by:alshahnaz
ID: 11950074
okay guys i boost the point
pls assist

Shahnaz
0
 
LVL 2

Accepted Solution

by:
DiCeR earned 500 total points
ID: 12053258
You havent specified what HP Printer you have, but if it has a JetDirect network interface with a reasonably updated firmware,, I recommend you to download and install the HP WebJetAdmin package. Beware of long URL:

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=13039&prodTypeId=18972&prodSeriesId=27905

This package should give you management access to the printer (and any other printers you might have on the LAN) and allow you to turn off Telnet-service, FTP, protocols etc.etc.

DO NOT DISABLE/REMOVE SNMP IF YOU USE ANY JETADMIN PRODUCTS!!! These products rely heavily on SNMP for operations.

I realize that WebJetAdmin might be overkill for your question, but with so little information provided it should cover most eventualities anyway.

Hope this helps.
0
 
LVL 7

Author Comment

by:alshahnaz
ID: 12054091
the printer is
HP LaserJet 4050N
0
 
LVL 2

Expert Comment

by:DiCeR
ID: 12054514
The 4050N Model should work well with WebJetAdmin. Please let us know how it works out.
0
 
LVL 7

Author Comment

by:alshahnaz
ID: 12061308
hi buddy,

see this article

http://support.microsoft.com/default.aspx?scid=kb;en-us;315008

hope it solve ur probs.

Shahnaz
0
 
LVL 7

Author Comment

by:alshahnaz
ID: 12061612
thanks buddy it worked.
very helpful.

cheers,
Shahnaz
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
What Can't I Connect by FTP??? 27 97
Looking for open port with Telnet 5 57
eigrp - not allow a subnet from advertising 1 37
Nimble Storage 3 66
Data center, now-a-days, is referred as the home of all the advanced technologies. In-fact, most of the businesses are now establishing their entire organizational structure around the IT capabilities.
Most of the applications these days are on Cloud. Cloud is ubiquitous with many service providers in the market. Since it has many benefits such as cost reduction, software updates, remote access, disaster recovery and much more.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

785 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question