Still celebrating National IT Professionals Day with 3 months of free Premium Membership. Use Code ITDAY17

x
?
Solved

Net connectivity

Posted on 2004-08-29
3
Medium Priority
?
184 Views
Last Modified: 2010-04-17


Dear Sirs,

We are getting a 128kbps internet from one of the leading ISP.Kindly suggest me to establish the net facility for all the users in my local lan. How can implement VPN connectivity?

Please find below the connectivity flow which are planning to setup. At the end ISP will provide ethernet output through fibre to ethernet converter.

------------------------------------------------------------------
Cisco 3660-DTE cable(back to back)-Dlink router-DCE cable  -Dlink Routers fastethernet -Media converter-Fibre-Media converter-Ethernet output
------------------------------------------------------------------
Waiting for your reply ...

Thanks in advance
0
Comment
Question by:ssshibu
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 36

Expert Comment

by:grblades
ID: 11929660
Hi ssshibu,
The easiest way would be to put something like a Cisco PIX firewall on the ethernet interface at the end.
0
 

Author Comment

by:ssshibu
ID: 11938969
Thanks...

In firewall can I give internet access to all the Pcs in my local LAN?

How do i establish VPN connectivity?
0
 
LVL 36

Accepted Solution

by:
grblades earned 500 total points
ID: 11939868
Yes you can control which machines can have access. By default all machines on your local network are permitted to access everything.

There are lots of configuration examples to setup the PIX for VPN.
This is the main Cisco one - http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/prod_configuration_examples_list.html
I have a couple of examples on my website also - http://www.gbnetwork.co.uk/networking/
0

Featured Post

Free Tool: IP Lookup

Get more info about an IP address or domain name, such as organization, abuse contacts and geolocation.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

It happens many times that access list (ACL) have to be applied to outgoing router interface in order to limit some traffic.This article is about how to test ACL from the router which is not very intuitive for everyone. Below scenario shows simple s…
We've been using the Cisco/Linksys RV042 for years as: - an internet Gateway - a site-to-site VPN device - a leased line site-to-site subnet-to-subnet interface (And, here I'm assuming that any RV0xx behaves the same way as an RV042.  So that's …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

715 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question