Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

### Closing the old questions in Networking###

Posted on 2004-08-30
6
230 Views
Last Modified: 2010-04-11
Hello experts,

As you had probably noticed, there is an organized effort to get all the abandoned questions closed (abandoned question is a question that has not comments for 22 or more days). This way we move the really answered questions in the PAQs and delete the nonanswered ones. And of course all the experts that had answered questions get their points - although it is not the Primary function of the cleanup, it is something that is also a plus:).

If you are interested in helping, please read this:
http://www.experts-exchange.com/help.jsp#hs7

If you are still interested, please post here with whatever questions you may have for the process. In case you decode it is not for you - please if you see such recommendation in a question that you had participated in, take your time to object if needed or to post your opinion if you are asked for it.

Thanks in advance to anyone that will decide to help.

If you want to help in another area, check the area for such question, post here specifying the area or send me a mail.

AnnieMod
Cleanup Admin
0
Comment
Question by:AnnieMod
6 Comments
 
LVL 96

Expert Comment

by:Bob Learned
ID: 12160114
I am in here too :)

Bob
0
 
LVL 11

Expert Comment

by:kabaam
ID: 12162407
yes, AnnieMod, that would be a good idea.  I am now a full time student and employee and I have lost all my free time :-(
I'll be back and I will let you know when I can help out.
C
0
 

Accepted Solution

by:
AnnieMod earned 0 total points
ID: 12275207
Everyone- A new question is started - so please subscribe there.
http://www.experts-exchange.com/Networking/Q_21163394.html

kabaam,
When you are ready tto help again, just post there:)

grblades ,
I will be reassigning your range too as I had not heard from you  for ages. Please post there if you want to help. Thanks :)
Annie
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

861 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question