Solved

squid-users] Could not determine fully qualified hostname. Please set 'visible_hostname'

Posted on 2004-09-03
3
836 Views
Last Modified: 2008-01-09
i ve this message when 1 run ./RunCache
in /usr/local/squid/bin

i ve try to edit my squid.conf and add
visible_hostname:mandrake where mandrake is the result of the command
hostname i ve this message when 1 run ./RunCache
in /usr/local/squid/bin

i ve try to edit my squid.conf and add
visible_hostname:mandrake where mandrake is the result of the command
hostname i ve this message when 1 run ./RunCache
in /usr/local/squid/bin

i ve try to edit my squid.conf and add
visible_hostname:mandrake where mandrake is the result of i ve this message when 1 run ./RunCache
in /usr/local/squid/bin

i ve try to edit my squid.conf and add
visible_hostname:mandrake where mandrake is the result of the command
hostname i ve this message when 1 run ./RunCache
in /usr/local/squid/bin

i ve try to edit my squid.conf and add
visible_hostname:mandrake where mandrake is the result of the command
hostname i ve this message when 1 run ./RunCache
in /usr/local/squid/bin

i ve try to edit my squid.conf and add
visible_hostname:mandrake where mandrake is the result of the command
hostname i ve this message when 1 run ./RunCache
in /usr/local/squid/bin

i ve try to edit my squid.conf and add
visible_hostname:mandrake where mandrake is the result of the command
hostname i ve this message when 1 run ./RunCache
in /usr/local/squid/bin

i ve try to edit my squid.conf and add
visible_hostname:mandrake where mandrake is the result of the command
hostname i ve this message when 1 run ./RunCache
in /usr/local/squid/bin

i ve try to edit my squid.conf and add
visible_hostname:mandrake where mandrake is the result of the command
hostname i ve this message when 1 run ./RunCache
in /usr/local/squid/bin

i ve try to edit my squid.conf and add
visible_hostname:mandrake where mandrake is the result of the command
hostname i ve this message when 1 run ./RunCache
in /usr/local/squid/bin

i ve try to edit my squid.conf and add
visible_hostname:mandrake where mandrake is the result of the command
hostname the command
hostname
0
Comment
Question by:bkniazi
3 Comments
 
LVL 17

Accepted Solution

by:
owensleftfoot earned 50 total points
ID: 11977802
You could try adding
127.0.0.1      localhost to /etc/hosts

0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
This video shows how to use Hyena, from SystemTools Software, to bulk import 100 user accounts from an external text file. View in 1080p for best video quality.

820 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question