?
Solved

keep getting blue screens!

Posted on 2004-09-06
3
Medium Priority
?
524 Views
Last Modified: 2007-12-19
hi, ive recently been having a lot of blue screens, first off i was told it was my keyboard driver so i changed that and it looked as if it had stopped, but then i started to get them again and i thought it was my dvd writer, so i have disconnected that, and now i have reformatted and when i go to run norton system scan i keep getting blue screens,

my two favourite ones are

Driver IRQL not less or equal

i8042prt.sys address f86853a3 base at f8685000 date stamp 3d6de41d

and the other

Stop 0x000000BE (0x00460020, 0x16613025, 0xA9D7B420, 0x0000000A)

please can someone help as its been dragging on for months now, and ive come to the point where the next time it does it its going out the window

cheers
0
Comment
Question by:mhaysom123
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 32

Accepted Solution

by:
LucF earned 2000 total points
ID: 11991462
Hi mhaysom123,

http://www.aumha.org/win5/kbestop.htm
0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL

What microsoft has to say about it:
http://www.microsoft.com/technet/prodtechnol/winxppro/reskit/prmd_stp_ottj.asp

The system attempted to access pageable memory using a kernel process IRQL that was too high. The most typical cause is a bad device driver (one that uses improper addresses). It can also be caused by caused by faulty or mismatched RAM, or a damaged pagefile.

Error Message with RAM Problems or Damaged Virtual Memory Manager
http://support.microsoft.com/?kbid=810093

Could be caused by bad memmory, check it with a tool like Memtest86:
http://www.memtest86.com

0x000000BE: ATTEMPTED_WRITE_TO_READONLY_MEMORY
http://www.aumha.org/win5/kbestop.php#0xbe

What Microsoft has to say about it:
http://www.microsoft.com/technet/prodtechnol/winxppro/reskit/prmd_stp_ovrp.asp

A driver attempted to write to read-only memory. Commonly occurs after installing a faulty device driver, system service, or firmware. If a driver file is named in the error message, try to correct the problem by disabling, removing, or rolling back the driver.

So in both cases, it could be a bad driver, I suggest you to take a good look at your printerdriver as i8042prt.sys points that one out.

Greetings,

LucF
0
 

Author Comment

by:mhaysom123
ID: 12027375
yeah that seems to have sorted it, cheers!
0
 
LVL 32

Expert Comment

by:LucF
ID: 12028525
Glad to help :)

LucF
0

Featured Post

Enterprise Mobility and BYOD For Dummies

Like “For Dummies” books, you can read this in whatever order you choose and learn about mobility and BYOD; and how to put a competitive mobile infrastructure in place. Developed for SMBs and large enterprises alike, you will find helpful use cases, planning, and implementation.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Are you unable to synchronize your OST (Offline Storage Table) file with Microsoft Exchange Server? Is your OST file exceeding 2 GB size limit? In Microsoft Outlook 2002 and earlier versions, there is a 2 GB size limit for the OST file. If the file …
We have adopted the strategy to use Computers in Student Labs as the bulletin boards. The same target can be achieved by using a Login Notice feature in Group policy but it’s not as attractive as graphical wallpapers with message which grabs the att…
Two types of users will appreciate AOMEI Backupper Pro: 1 - Those with PCIe drives (and haven't found cloning software that works on them). 2 - Those who want a fast clone of their boot drive (no re-boots needed) and it can clone your drive wh…
In this video, Percona Solutions Engineer Barrett Chambers discusses some of the basic syntax differences between MySQL and MongoDB. To learn more check out our webinar on MongoDB administration for MySQL DBA: https://www.percona.com/resources/we…
Suggested Courses

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question