?
Solved

Saving files to a spanned volume

Posted on 2004-09-07
8
Medium Priority
?
223 Views
Last Modified: 2012-05-05
I have a C: drive and a spanned D drive . I downloaded Adobe reader and saved it into D: drive, with a shortcut into my desktop.
when I right-clicked the shortcut--->properties, it gave me location C:\......... something.
Is this normal behaviour of spanned volumes?

Thanks
0
Comment
Question by:Chuckbuchan
  • 4
  • 4
8 Comments
 
LVL 32

Expert Comment

by:LucF
ID: 12001195
Hi Chuckbuchan,

Did you install the file? If so, by default it installes on the C: drive.
Otherwise, did you by mistake check the properties of the shortcut and the location of the shortcut instead of the location of the destination?

Greetings,

LucF
0
 

Author Comment

by:Chuckbuchan
ID: 12001250
when I downloaded the file it asked me about the location where to save it, then I chose D:
on the desktop when I right-clicked the shortcut for the file----properties, it gave me its location as C:\........something.
Anyway , I went to D: drive then I found the Executable copy of that file in the D drive. So I am just confused why in the properties of the shortcut it gave me the location of the file in C:\.....................
0
 
LVL 32

Accepted Solution

by:
LucF earned 750 total points
ID: 12001402
It probably gave you the location of the shortcut, not the location of the file, please double-check.

LucF
0
Concerto Cloud for Software Providers & ISVs

Can Concerto Cloud Services help you focus on evolving your application offerings, while delivering the best cloud experience to your customers? From DevOps to revenue models and customer support, the answer is yes!

Learn how Concerto can help you.

 

Author Comment

by:Chuckbuchan
ID: 12001436
You might be right..... but if I didn't know that I installed the file in D: drive , how could I have known the real location of the file.
Or let 's assume somebody else used my computer and wanted to know the location of that file, how can he tell where the location of the file is?
0
 
LVL 32

Expert Comment

by:LucF
ID: 12001450
Right-click the shortcut and choose properties, now check "Target"

LucF
0
 

Author Comment

by:Chuckbuchan
ID: 12001471
I will give you the answer tomorrow........am leaving now. thanks
0
 

Author Comment

by:Chuckbuchan
ID: 12005203
I was mistaken. I downloaded the set up file to D: drive , but when I installed it I installed it in C: drive , which was the default. I understand now, after I uninstalled it then reinstalled it.
0
 
LVL 32

Expert Comment

by:LucF
ID: 12006768
Good to hear :)

LucF
0

Featured Post

Upgrade your Question Security!

Add Premium security features to your question to ensure its privacy or anonymity. Learn more about your ability to control Question Security today.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this article, the configuration steps in Zabbix to monitor devices via SNMP will be discussed with some real examples on Cisco Router/Switch, Catalyst Switch, NAS Synology device.
In this article I will be showing you how to subnet the easiest way possible for IPv4 (Internet Protocol version 4). This article does not cover IPv6. Keep in mind that subnetting requires lots of practice and time.
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…
Monitoring a network: how to monitor network services and why? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the philosophy behind service monitoring and why a handshake validation is critical in network monitoring. Software utilized …

807 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question