Solved

Win2k RAS Modem Quickie

Posted on 2004-09-07
4
140 Views
Last Modified: 2012-05-05
Hi All

Ive just set up a new ras server with a dial up modem, it all works fine, i am just wondering if there is a way to change how long the modem waits before accepting the incoming call (IE How many rings or seconds to wait before answering). Im not sure if this is possible so any help is greatly appreciated

Thanks
0
Comment
Question by:Porka
  • 2
4 Comments
 
LVL 12

Expert Comment

by:valicon
ID: 12002767
To my knowledge there is no setting on the RRAS server to answer inbound calls after x rings.  :)
0
 
LVL 12

Expert Comment

by:valicon
ID: 12002829
Depending on the modems that you are using you may be able to set that feature through the modems properties.  Check the modems properties, I know some digiboard modems do have this feature. Here is an example from Intel modems:



If you use a SatisFAXtion Modem/350, SatisFAXtion Classic, or Upgraded Upgraded SatisFAXtion Classic, you can configure Crosstalk Communicator's Hostr's Host Mode to allow the SatisFAXtion to receive faxes. Here's how:

Use the SatisFAXtion SETUP program to set the faxmodem to answerthe SatisFAXtion SETUP program to set the faxmodem to answer after the desired number of rings. Specify at least 2 rings if yourr the desired number of rings. Specify at least 2 rings if your phone line provides a "distinctive ring". Otherwise, specify 1 ringe line provides a "distinctive ring". Otherwise, specify 1 ring (or more if desired).more if desired).


This example is for a fax, but that doesnt matter.  Whether the modem picks up after one ring or four rings, this is a function of the modem and not of the RRAS server.  Hope this helps.

0
 
LVL 6

Author Comment

by:Porka
ID: 12002897
Found solution on JSI site at
http://www.jsiinc.com/suba/tip0100/rh0114.htm

The only way I have found to get RAS to answer on "x" rings is to edit the registry at:

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class

and to locate the modems entry (Usually the 4th entry). Double click to expand it. Locate the modem in question where 0000 is the 1st modem. Double click and highlight the Monitor key. Double click the 1st entry which should be ATS0= and change the number of rings.

You will need to stop and restart the RAS service, but a reboot may be necessary.

0
 

Accepted Solution

by:
ee_ai_construct earned 0 total points
ID: 12007227
Closed, 250 points refunded.
ee_ai_construct (replacement part #xm34)
Community Support Moderator
0

Featured Post

Is Your Active Directory as Secure as You Think?

More than 75% of all records are compromised because of the loss or theft of a privileged credential. Experts have been exploring Active Directory infrastructure to identify key threats and establish best practices for keeping data safe. Attend this month’s webinar to learn more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Cannot access port 443 4 575
Syteline and a new domain controller 4 703
Task scheduler to manage event fails 4 735
Connect Windows 8 VPN to ISA Server 2000 VPN 5 108
NTFS file system has been developed by Microsoft that is widely used by Windows NT operating system and its advanced versions. It is the mostly used over FAT file system as it provides superior features like reliability, security, storage, efficienc…
Large Outlook files lead to various unwanted errors and corruption issues. Furthermore, large outlook files can also make Outlook take longer to start-up, search, navigate, and shut-down. So, In this article, i will discuss a method to make your Out…
This Micro Tutorial will teach you how to censor certain areas of your screen. The example in this video will show a little boy's face being blurred. This will be demonstrated using Adobe Premiere Pro CS6.
This Micro Tutorial will give you a basic overview how to record your screen with Microsoft Expression Encoder. This program is still free and open for the public to download. This will be demonstrated using Microsoft Expression Encoder 4.

911 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

21 Experts available now in Live!

Get 1:1 Help Now