Solved

VPN to PIX506 connects but doesnt route data.

Posted on 2004-09-09
2
313 Views
Last Modified: 2010-04-12
Hi, I am connecting to a PIX506 via windows VPN client. It connects and I get the 'registered on network' message however the recieved packets stalls at about 180 where other connections hit 1700 just connecting. I an connecting from a 192.168.123.x network to a 10.0.1.x network so no conflict there.

Q. Do I need to add a different address pool and an ACL for VPNn permit or NoNat?

My conf;

: Saved
: Written by enable_15 at 01:18:43.558 CST Tue Sep 7 2004
PIX Version 6.3(3)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password vFtAThZLP84lfBcC encrypted
passwd LPPzNgXFvyD8TEcH encrypted
hostname box
domain-name blah.net
clock timezone CST -6
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol ils 389
fixup protocol pptp 1723
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list acl_out permit tcp any any eq www
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 64.42.231.158 255.255.255.252
ip address inside 10.0.1.2 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool pptp-pool 10.0.1.240-10.0.1.245
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp interface www 10.0.1.200 www netmask 255.255.255.255 0 0
 access-group acl_out in interface outside
route outside 0.0.0.0 0.0.0.0 64.42.231.157 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 10.0.1.100 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-pptp
sysopt noproxyarp inside
telnet timeout 10
ssh 2xx.2xx.xxx.xxx 255.255.255.255 outside
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 10
console timeout 20
vpdn group 1 accept dialin pptp
vpdn group 1 ppp authentication pap
vpdn group 1 ppp authentication chap
vpdn group 1 ppp authentication mschap
vpdn group 1 ppp encryption mppe auto
vpdn group 1 client configuration address local pptp-pool
vpdn group 1 client configuration dns 10.0.1.55
vpdn group 1 client configuration wins 10.0.1.55
vpdn group 1 pptp echo 60
vpdn group 1 client authentication local
vpdn username blah password xxxxxxxxxx
vpdn enable outside
terminal width 80
0
Comment
Question by:mothman999
2 Comments
 
LVL 79

Accepted Solution

by:
lrmoore earned 125 total points
ID: 12029200
I would suggest using a different IP subnet in the vpn address pool..

>ip local pool pptp-pool 10.0.1.240-10.0.1.245

change to
    ip local pool pptp-pool 10.2.1.240-10.2.1.245

Then you can add the no-nat access-list
   access-list no_nat permit 10.0.1.0 255.255.255.0 10.2.1.0 255.255.255.0

Apply the acl to the nat process using nat "0"
   nat (inside) 0 access-list no_nat


 
0
 

Author Comment

by:mothman999
ID: 12031835
Thanks, that was the charm. I added IP after the permit and was passing packets! Thanks again... MM
0

Featured Post

Maximize Your Threat Intelligence Reporting

Reporting is one of the most important and least talked about aspects of a world-class threat intelligence program. Here’s how to do it right.

Join & Write a Comment

Do you have an old router lying around the house that you don’t know what to do with? Check the make and model, then refer to either of these links to see if its compatible. http://www.dd-wrt.com/site/support/router-database http://www.dd-wrt.c…
If you use NetMotion Mobility on your PC and plan to upgrade to Windows 10, it may not work unless you take these steps.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

743 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

16 Experts available now in Live!

Get 1:1 Help Now