• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 809
  • Last Modified:

Cisco 501 PIX - Delete a Access List Entry

Hello All;

   This is strange?

   I have an ACL Entry that is incorrect in the "Hyper Console"
But does not appear in the "Device Manager"?

  It is
static (inside,outside) xx.xxx.xxx.189 192.168.1.189 netmask 255.255.255.255

The "Outbound" xx.xxx.xxx.189
Is incorrect. I have the proper entry inserted, But the outside
World is still picking up on the incorrect......  189

How can I delete the    
static (inside,outside) xx.xxx.xxx.189 192.168.1.189 netmask 255.255.255.255

If it was in the "Device Manger" I would delete it out of there, but I cannot find it in: Translation Filters or Host/Networks

Thank you for any information that you may have.

Wayne
   
0
Wayne Barron
Asked:
Wayne Barron
1 Solution
 
lrmooreCommented:
just use "no"

pix(config)#no static (inside,outside) xx.xxx.xxx.189 192.168.1.189 netmask 255.255.255.255

You might have to clear xlate first, but definately do it afterwards

pix(config)#clear xlate

0
 
Wayne BarronAuthor Commented:
Thank you Sir :-)

carrzkiss
0

Featured Post

Free Tool: Path Explorer

An intuitive utility to help find the CSS path to UI elements on a webpage. These paths are used frequently in a variety of front-end development and QA automation tasks.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now