Solved

KERNEL_DATA_INPAGE_ERROR....

Posted on 2004-09-13
4
235 Views
Last Modified: 2008-01-09
My computer hasn't been working well lately and a lot of the time after startup I'll here the HD make noise as if it's starting up again. Then other times the CPU will be at 100% and only the mouse will work, until it freezes totally and I'll get the KERNEL_DATA_INPAGE_ERROR.
I've swapped out the HD's, cables, RAM and it still seems to happen.

Are we talking about a bad MB?

Anyone have any ideas?
0
Comment
Question by:wlandymore
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
4 Comments
 
LVL 1

Author Comment

by:wlandymore
ID: 12043432
Also,
when the computer is rebooted, a lot of the time it won't detect one or both of the HD's and I end up getting a boot error.
Even after the computer has been rebooted when it has been going at 100% CPU, the light for the CPU will stay on constantly and will stay solid.

This computer seems to be unusable. The only time I could get it to start was when I removed a stick of RAM. But then the problems all started again about 5 min. after startup.
0
 
LVL 11

Accepted Solution

by:
DoTheDEW335 earned 50 total points
ID: 12044245
Test the HDD's in another machine or
I would boot to disk when it has the disks recognized and run a diagnostic on the HDD 1st to make sure the drives are ok.

http://www.maxtor.com/en/support/products/index.htm          Maxtor/Quantum
http://www.fcpa.fujitsu.com/download/hard-drives/#diagnostic     Fujitsu
http://www.samsungelectronics.com/hdd/support/utilities/utilities_index.html       Samsung
http://www.seagate.com/support/seatools/index.html          Seagate
http://support.wdc.com/download/                    Western Digital
http://www.hgst.com/hdd/support/download.htm#DFT           IBM and Hitachi

If the drives test ok then you might need to flash the bios or the MB also could be bad.
If you have another PC I would test the RAM in it to rule that out.
0
 
LVL 1

Author Comment

by:wlandymore
ID: 12073984
It was the motherboard....
thanks for the help.
0
 
LVL 11

Expert Comment

by:DoTheDEW335
ID: 12074305
Glad to hear you got it sorted out. Thanks for the accept.
0

Featured Post

Enterprise Mobility and BYOD For Dummies

Like “For Dummies” books, you can read this in whatever order you choose and learn about mobility and BYOD; and how to put a competitive mobile infrastructure in place. Developed for SMBs and large enterprises alike, you will find helpful use cases, planning, and implementation.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this article you will get to know about pros and cons of storage drives HDD, SSD and SSHD.
Does your iMac really need a hardware upgrade? Will upgrading RAM speed-up your computer? If yes, then how can you proceed? Upgrading RAM in your iMac is not as simple as it may seem. This article will help you in getting and installing right RA…
A short tutorial showing how to set up an email signature in Outlook on the Web (previously known as OWA). For free email signatures designs, visit https://www.mail-signatures.com/articles/signature-templates/?sts=6651 If you want to manage em…
Suggested Courses

737 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question