Solved

Virtual Server 2005 External IP Address

Posted on 2004-09-13
2
245 Views
Last Modified: 2013-11-15
Guys,
I’m having some issues with VS05.  The install went great and everything can be access internally.  The issue comes in when an external IP address try’s to access VS.  I was wondering if there is something I missed in the configuration part.  I have surfed Microsoft’s website and it says it can be done, but doesn’t show how to do it.  Any help with this would be great.  Thank you so much!

-RIDH
0
Comment
Question by:Drew Lake
2 Comments
 
LVL 13

Accepted Solution

by:
hstiles earned 250 total points
ID: 12045338
Just had a look at this appears to be what you do.

Open the Virtual Server admin web page.  Create a new virtual network adapter bound to the physical adapter in your server.
Create a new virtual machine and configure it to use this virtual network adapter.  You can then assign the adapter an IP address once you have installed an OS on the virtual machine.
0
 
LVL 2

Author Comment

by:Drew Lake
ID: 12046765
hstiles,
Your a winner!  Thanks for the help!
0

Featured Post

Complete VMware vSphere® ESX(i) & Hyper-V Backup

Capture your entire system, including the host, with patented disk imaging integrated with VMware VADP / Microsoft VSS and RCT. RTOs is as low as 15 seconds with Acronis Active Restore™. You can enjoy unlimited P2V/V2V migrations from any source (even from a different hypervisor)

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If you're not part of the solution, you're part of the problem.   Tips on how to secure IoT devices, even the dumbest ones, so they can't be used as part of a DDoS botnet.  Use PRTG Network Monitor as one of the building blocks, to detect unusual…
When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
This tutorial will walk an individual through the process of configuring basic necessities in order to use the 2010 version of Data Protection Manager. These include storage, agents, and protection jobs. Launch Data Protection Manager from the deskt…
This tutorial will show how to configure a single USB drive with a separate folder for each day of the week. This will allow each of the backups to be kept separate preventing the previous day’s backup from being overwritten. The USB drive must be s…

730 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question