Solved

linksys wired print server stops printing over time

Posted on 2004-09-14
3
219 Views
Last Modified: 2010-04-11
I'm running a small wireless network with 8 workstations and a single (Linksys BEFW11S4 wireless B router w/ 4port ethernet switch)Access Point. All WS have WinXP pro or home ed. There is a linksys wired printserver connected to the wireless router that hosts 1 printer which serves all the workstations.  Every few days the workstations lose connection with the printserver/printer and the easiest way to fix the problem has been to unplug the print server and let it refresh.  I need a permanent solution and an explanation of the problem.  Does the print server cache addresses and fill up over time?

CG
0
Comment
Question by:cgillet
3 Comments
 
LVL 15

Accepted Solution

by:
Yan_west earned 250 total points
ID: 12058929
Hi, check out the support page at linksys, and look if there is a Firmware upgrade for your linksys printserver.. If there is a new one, flash your printserver's bios with the new firmware.

http://www.linksys.com/support/support.asp
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
OSPF - Convergence & Downtime 9 71
Remote access problem to camera controller 9 67
Bandwidth cap???? 8 56
Mapping a folder on a NAS to a drive letter 2 43
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
ADCs have gained traction within the last decade, largely due to increased demand for legacy load balancing appliances to handle more advanced application delivery requirements and improve application performance.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

685 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question