Solved

cisco 700 series

Posted on 2004-09-16
2
276 Views
Last Modified: 2010-04-17
Hi all

I can buy a cheap cisco router 700 series router. it says its a isdn modem what i want to know is
can you use the router without isdn as i have broadband.

thanks davey
0
Comment
Question by:davy999
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 43

Expert Comment

by:JFrederick29
ID: 12074123
0
 
LVL 79

Accepted Solution

by:
lrmoore earned 50 total points
ID: 12074211
No. It has only Ethernet port and one ISDN WAN port. You need something with an Ethernet WAN port and another Ethernet LAN port. Most DSL/Cable routers at your local electronics store are what you need.
0

Featured Post

Supports up to 4K resolution!

The VS192 2-Port 4K DisplayPort Splitter is perfect for anyone who needs to send one source of DisplayPort high definition video to two or four DisplayPort displays. The VS192 can split and also expand DisplayPort audio/video signal on two or four DisplayPort monitors.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

New Server 172.16.200.2  was moved from behind Router R2 f0/1 to behind router R1 int f/01 and has now address 172.16.100.2. But we want users still to be able to connected to it by old IP. How to do it ? We can used destination NAT (DNAT).  In DNAT…
Quality of Service (QoS) options are nearly endless when it comes to networks today. This article is merely one example of how it can be handled in a hub-n-spoke design using a 3-tier configuration.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Suggested Courses
Course of the Month7 days, 1 hour left to enroll

622 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question