Solved

IPBOOTP Error?

Posted on 2004-09-16
1
777 Views
Last Modified: 2012-08-13
I have been receiving the following error in the System Event Viewer on my Windows 2000 Server for the past few days.  What is this?

Event Type:      Error
Event Source:      IPBOOTP
Event Category:      None
Event ID:      30022
Date:            9/15/2004
Time:            12:59:01 PM
User:            N/A
Computer:      SERVER
Description:
IPBOOTP was unable to receive an incoming message on the local interface with IP address 192.168.1.7. The data is the error code.
Data:
0000: 46 27 00 00               F'..    


Thanks
0
Comment
Question by:cgriffith4
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 6

Accepted Solution

by:
tanelorn earned 250 total points
ID: 12075050
Hi,  this might help you out

quoted from http://www.eventid.net./display.asp?eventid=30022&eventno=905&source=IPBOOTP&phase=1


 Various newsgroup postings:
- "This problem is caused by misconfigured or corrupted network card drivers. Installing the latest driver fixed the problem."

- "Double-check the configuration of your DHCP Relay Agent (if it's installed). You might have it on the wrong interface. Also, when there is data in the error code, it sometimes helps to have the data."

- "Unless you are routing DHCP traffic from one subnet to another through the RRAS Router, then you probably don't really need the relay agent. Typically, this error appears in relationship to the use/misconfiguration of the DHCP Relay Agent. If all you are using the RRAS server for is a RAS server
for remote clients, or Dial-up connectivity for internal clients, then you don't need the DHCP Relay agent."

- "This error is related to DHCP Relay Agent, and normally not being configured
properly. Are you aware that you are running the Relay Agent, and if so do
you have it set up properly. Normally on a Router, broadcasts are not forwarded ( routers separate broadcast domains ) The Relay Agent puts a twist on this.  it will listen for a DHCP Discover broadcast on the interface specified, and unicast it to the server that is specified. The Relay Agent is in RRASMgmt.msc  If you are not using it, then you can go ahead and delete it."  
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

NTFS file system has been developed by Microsoft that is widely used by Windows NT operating system and its advanced versions. It is the mostly used over FAT file system as it provides superior features like reliability, security, storage, efficienc…
Unified and professional email signatures help maintain a consistent company brand image to the outside world. This article shows how to create an email signature in Exchange Server 2010 using a transport rule and how to overcome native limitations …
A short tutorial showing how to set up an email signature in Outlook on the Web (previously known as OWA). For free email signatures designs, visit https://www.mail-signatures.com/articles/signature-templates/?sts=6651 If you want to manage em…

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question