Improve company productivity with a Business Account.Sign Up

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 276
  • Last Modified:

Memory Clocking

I am experiencing problems with my memory as of late. I have been having alot of BSODs, and I have tested every bit of hardware. All of it works ok.

The OS is XP Pro, freshly installed. The BIOS has been flashed this week.

I fixed my computer once by manually setting the voltage control. However I do not know what the proper setting would be to clock it.

512DDR PC3200

I am almost positive that this will fix it as it has before on this same board. I placed the DIMM into another board and it worked fine. I ran memtest86 while it was installed in the other board and it passed fine.

All I need to know is the proper voltage setting for the RAM.

If you need more info, let me know. I dont have the computer hooked up right now, so I can't tell you too much, unless you need to know, then I will go ahead and get the info for you.

Your help is appreciated.
Matthew Wadsworth
-The Computer Guy,
Lancaster CA, USA
0
The_Computer_Guy
Asked:
The_Computer_Guy
1 Solution
 
Joe-LouisCommented:
What kind of motherboard do you have ?
0
 
CallandorCommented:
The correct "safe" range for PC3200 is 2.5v - 2.8v for PC3200 memory, with 2.6v the JEDEC standard.

http://www.pcstats.com/articleview.cfm?articleID=1542
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

Worried about phishing attacks?

90% of attacks start with a phish. It’s critical that IT admins and MSSPs have the right security in place to protect their end users from these phishing attacks. Check out our latest feature brief for tips and tricks to keep your employees off a hackers line!

Tackle projects and never again get stuck behind a technical roadblock.
Join Now