Solved

ISA 2000, Estation leave network.

Posted on 2004-09-17
6
146 Views
Last Modified: 2010-03-18
HI! ! !

Hello I am from Guatemala. I only speak just a little bit of English. I have the following problem: I have a Server with S.O Windows 2000 server and Isa 2000, all working well around a year but the stations began to leave network. The Event viewer always display an ISA error 14140, but until one month begin another error, w32time (ID: 62)
And since then the stations began to leave network. I try to reinstall ISA, it work for tree days (the ISA error persist) but now The problem began again.

Microsoft say that to correct the error w32time we can do this:  try to syncronized the server'clock with the servers:
time.windows.com
tick.usno.navy.mil
tock.usno.navy.mil
htp2.usno.navy.mil

I try it, but this don't work. What can I do? Really, I need Your Help. . .
0
Comment
Question by:Soporte-Metrica
  • 3
6 Comments
 
LVL 20

Expert Comment

by:Debsyl99
ID: 12089570
Hi

I don't know if this will help but here's an idea. On your server set this key from typing start - run - regedit. This way it doesn't need to sync with an external time server, which is not necessary unless you are running a network that is dependent on the correct time being regularly synchronised with an outside server.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters]
"Type"="NoSync"

On the client pc's from a command prompt ie click start - run - cmd. Then type net time /set sntp:yourservername

where yourservername is the name of your domain controller.

Hopefully this should clear up your event 62 errors. If it doesn't could you post the event logs from the server and a pc that is having problems? You can access these from control panel, administrative tools, event viewer,

Hope this helps

Deb :))
0
 
LVL 20

Expert Comment

by:Debsyl99
ID: 12089576
Oh and be very careful what you change with regedit as you could damage your system if you get it wrong - always back up the registry first,

0
 

Author Comment

by:Soporte-Metrica
ID: 12195946
Hi Deb

I'm going to try this. But really my problem is that the PC's leave of network, in the command prompt i renew the ip and the PC beging to work another time, but in no much time another PC leave of network, and this repeat, and repeat.

What do you think? this is a problem of ISA or is an a problem with w32time...
0
 
LVL 20

Accepted Solution

by:
Debsyl99 earned 500 total points
ID: 12196134
Sounds possibly like an ISA problem actually, so I'd follow this through. If it helps then it is,
How To Configure the Simple Network Time Protocol (SNTP) on ISA Server
http://support.microsoft.com/default.aspx?scid=kb;EN-US;323621

Deb :))
0

Featured Post

Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Enterprise networks where VoIP phones have been deployed frequently use port configurations that allow both a computer and an IP phone to be plugged into the same switch port but use different VLANs. On Cisco equipment I'm referring to the "native V…
This article is in response to a question (http://www.experts-exchange.com/Networking/Network_Management/Network_Analysis/Q_28230497.html) here at Experts Exchange. The Original Poster (OP) requires a utility that will accept a list of IP addresses …
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…
Need to grow your business through quality cloud solutions? With everything required to build a cloud platform and solution, you may feel like the distance between you and the cloud is quite long. Help is here. Spend some time learning about the Con…

914 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now