Solved

router seems to disconect the client computers from the internet after a few minutes

Posted on 2004-09-22
1
231 Views
Last Modified: 2010-04-17
Hi all
I have a problem with my router

Previously when i first got the router both client computers that was online both had windows 98, I connected the router, installed the router wizard on the cd and boom both computers where working fine online.

I then recently change my operating system to windws 2000 NT technology, the other client has remained with windows 98, I have reset my router settings and tried to re-install the router settings via the cd. Both computers work with the internet for about a couple of minutes then all of a sudden our IE browsers stop working and we cannot access the internet anymore unless we restart our computers and re-power the modem and router. things like yahoo messenger seem to carry on working on the machines.

We use a cable connection for our internet, our router is just a standard broudband router made by Peak ( I believe)

Can anyone point me in  the right direction to fix our problem

Thank you.
Tazzy
0
Comment
Question by:tazzy_dude
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 1

Accepted Solution

by:
DeathOfRats earned 500 total points
ID: 12162587
I don't believe you problem is an issue with your router.  I say this because if you don't loose your connection to Instant Messanger, that means you are still on the internet.

Here are a couple of things to check:

Open a command prompt and type "ping www.google.com"... and then try "ping 64.233.171.104"

Reply back with your results and we can talk about it more from there.  I think that your problem is with a windows networking setting... perhaps DNS.

-DOR.
0

Featured Post

Don't miss ATEN at NAB Show April 24-27!

Visit ATEN at NAB Show to learn how our "Seamlessly Entertaining" solutions deliver fast, precise video streaming without delays for the broadcasting and media environment. ATEN will showcase its 16x16 Modular Matrix Switch (VM1600) and KVM Over IP Solution (KE6900 series).

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Stuck in INIT/DROTHER 2 78
Vlan to Vlan communication 9 124
Draytek (Site to Site VPN using IPSec) 6 70
Cisco 800 router unable to connect through TPG network 12 36
While it is possible to put two routes in place with the secondary having a higher metric, this may not always work. In the event of a failure that does not bring down the physical interface on the router the primary route is not removed. There is a…
I have seen some questions on problems with SSH/telnet access to Cisco routers that may occur despite the fact that from a PC connected to your LAN, Internet connectivity is in place and users can access Internet sites without any issues.  There are…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

696 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question