Solved

Microsoft Windows 2000 DHCP server

Posted on 2004-09-22
6
174 Views
Last Modified: 2010-05-18
Scenario
----------

You have a switched network with about 50 Windows 2000 Pro DHCP clients on one physical subnet. All these DHCP clients get TCP/IP configuration from a Windows 2000 DHCP server on same segment, which has one scope defined for this subnet. The switch is connected to two seperate routers,  A and B.

Some DHCP clients need to have router A as default gateway and some require router B to be default gateway.

How is it possible to implement this using scope options but without using "Advanced User Options"?

Thanks.


Hamid

0
Comment
Question by:htavakko
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
6 Comments
 
LVL 15

Expert Comment

by:Yan_west
ID: 12124478
Is this some question for your homework? According to EE guideline, experts cannot awnser these questions.
0
 
LVL 15

Expert Comment

by:adamdrayer
ID: 12124619
good call Yan, I didn't recognize it as such on the other question.
0
 

Author Comment

by:htavakko
ID: 12131382
Thank you all for your comments.

I think a good way of asking a question is by setting a scenario which is what I've done. This is no homework. All I was trying to do is to be clear and concise with no ambiguity in my question.

As for this problem, I was trying to find an efficient way of solving my problem without having to visit every workstation that needed a specific TCP/IP  configuration, which is what is needed if one uses the "Advanced User Options". I've already figured out the solution which is to use "client reservations" in the defined scope for the subnet and setting the "router option" for the "client reservations".

The same goes for my other question on DHCH-DNS integration.

Hamid
0
 
LVL 15

Accepted Solution

by:
Yan_west earned 500 total points
ID: 12132884
Then yes you can.. go in your DHCP manager on your domain controller,  open your dhcp scope and click on the scope options section.

right click on scope options, and click configuration options.

Add value 003 Router, with the address of the gateway.

Voila, next time your client will get a lease, they will be assigned the correct gateway address..
0
 

Author Comment

by:htavakko
ID: 12133065
Thanks Yan. Hamid
0

Featured Post

Flexible connectivity for any environment

The KE6900 series can extend and deploy computers with high definition displays across multiple stations in a variety of applications that suit any environment. Expand computer use to stations across multiple rooms with dynamic access.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Have you ever set up your wireless router at home or in the office to find that you little pop-up bubble in the bottom right-hand corner of Windows read "IP Conflict - One of more computers on the network have been assigned the following IP address"…
This article is in response to a question (http://www.experts-exchange.com/Networking/Network_Management/Network_Analysis/Q_28230497.html) here at Experts Exchange. The Original Poster (OP) requires a utility that will accept a list of IP addresses …
Monitoring a network: why having a policy is the best policy? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the enormous benefits of having a policy-based approach when monitoring medium and large networks. Software utilized in this v…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
Suggested Courses
Course of the Month10 days, 22 hours left to enroll

628 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question