Unable to display workstations in Domain.

I am having a problem.  I am unable to veiw my workstations through network neighborhood.  

Box Config:
Windows 2000 (DC)
WINS
DNS
Dual NICs ( I installed the Second Network Card this past weekend for load balancing)

I am able to join workstations to the domain and I can map network shares without any problems.  For some reason though it will not allow me to browse the network.  Can Someone help me out.  Thanks.
LVL 1
smartin0924Asked:
Who is Participating?
 
Adam LeinssConnect With a Mentor Commented:
Windows uses NETBIOS broadcasts to find neighboring PCs.  NETBIOS over TCP/IP needs to be enabled on the box you are using and the computers you are looking for. Is this enabled?  Does NETBIOS browsing work on any other computer?
0
 
smartin0924Author Commented:
Here is the message i recieve when trying to veiw the network.:

Microsoft Windows Network
The list of Servers for this workgroup is not currewntly available.
0
 
smartin0924Author Commented:
Yes NetBios is Enabled over TCP/IP.  I figured out what the problem was.  As mentioned above I installed the additional NIC this past weekend.  My first NIC was Assigned x.x.x.10 and the new NIC  I installed was getting its address from the DHCP server as x.x.x.3    I never set up the Team for the two NIC's.  Once i established the team I cleared the DNS entries and rebooted the system.  Everything is working correctly now.  Thanks for thr reply.  Since no one else replied to this question, I will give you the points.  Thanks for your help.
0
 
Adam LeinssCommented:
Glad you got it sorted out!  Thanks for the points.
0
All Courses

From novice to tech pro — start learning today.